1. DL manuals
  2. Venini
  3. Cooktop
  4. VGH60
  5. Instructions And Installation User Manual

Venini VGH60 Instructions And Installation User Manual

Summary of VGH60

  • Page 1

    Instructions and installation user manual models: vgh64 - vgh64c vgh60 - vgh60c vgh64cf please read this manual before installing the cooktop. Cod:01099ht - 17.10.2012.

  • Page 2

    2 dear customer, congratulations on purchasing your new product from think appliances. To register your parts and labour warranty (some conditions apply please refer to your warranty card for more details) please contact out customer care team on: 1800 444 357 our customer care centre is there to en...

  • Page 3: Description of The Cooktop

    3 natural u-lpg 1 rapid gas burne 12.0 mj 10.4 mj 2 semi-rapid gas burner 7.1 mj 6.2 mj 3 auxiliary gas burner 4.1 mj 3.5 mj 7 trivet 2 burner 8 burner 3 control knob 9 burner 1 control knob 10 burner 2 control knob (right) 11 burner 2 control knob (left) 15 electric ignition button 16 ultra rapid g...

  • Page 4: Use

    1) burners a diagram is screen-printed above each knob on the front panel. This diagram indicates to which burner the knob in question corresponds. After having opened the gas mains or gas bottle tap, light the burners as described below: - manual ignition push and turn the knob corresponding to the...

  • Page 5: Use

    5 use notes: use of a gas cooking appliance produces heat and moisture in the room in which it is installed. The room must therefore be well ventilated by keeping the natural air vents clear (fig. 3) and by activating the mechanical aeration device (suction hood or electric fan fig. 4 and fig. 5). I...

  • Page 6: Cleaning

    6 cleaning fig. 6 important: always disconnect the appliance from the gas and electricity mains before carrying out any cleaning operation. 2) cooktop periodically wash the cooktop, the pan stands, the enamelled burner caps “c” and the burner heads “t” (see fig. 6) with lukewarm soapy water. It must...

  • Page 7: Installation

    7 installation technical information for the installer this appliance shall be installed only by qualified personnel and in accordance with the manufacturer’s installation instructions, local gas fitting regulations, municipal building codes, water supply regulations, electrical wiring regulations, ...

  • Page 8: Installation

    8 5) gas connection the gas connection is located in the rear and on the underside of the appliance 100 mm from the right hand side. A. The cooktop can be connected with rigid pipe as specified in as5601 table 3.1. B. If installing with a hose assembly, install with a hose assembly that complies wit...

  • Page 9: Installation

    6) electrical connection the appliance is supplied with a 1800 mm long flexible supply lead. The point of attachment for this lead is located at the rear and on the underside of the appliance 380 mm from the right hand side. The voltage and power consumption are detailed on the underside of the appl...

  • Page 10: Adjustments

    10 adjustments always disconnect the appliance from the electricity main before making any adjustments. All seals must be replaced by the technician at the end of any adjustments or regulations. Our burners do not require primary air adjustment. A) data label the data label is located on the undersi...

  • Page 11: Conversions

    Conversions 8) u-lpg to natural gas conversion procedure appliance models: gas stainless steel cooktop models: vgh60c - vgh64c-vgh64cf vgh60 - vgh64 1. Remove each burner cap and burner skirt. 2. Remove the u-lpg main injector with a 7 mm/vf tube spanner and replace with the appropriate size natural...

  • Page 12: Conversions

    12 conversions 10) replacing the injectors the burners can be adapted to different types of gas by installing injectors suited to the type of gas required. To do this, first remove the burner tops using a wrench “b”. Now unscrew injector “a” (see fig. 15) and fit a injector corresponding to the type...

  • Page 13: Servicing

    13 servicing always turn off the electrical ignition before proceeding with any servicing operation. Servicing should be carried out only by qualified personnel. 11) replacing cooktop parts to replace the components fitted inside the hob, take off the knobs, all the movable parts of the hobs (trivet...

  • Page 14: Servicing

    14 servicing type of type of single - phase cooktop cable power supply cable types and sections attention!!! If the power supply cable is replaced, the installer should leave the ground wire longer than the phase conductors (fig. 19) and comply with the recommendations given in paragraph 6. Fig. 19 ...

  • Page 15

    Technical assistance and spare parts 15 before leaving the factory, this appliance will have been tested and regulated by expert and specialized personnel in order to guarantee the best performances. Any repairs or adjustments which may be subsequently required may only be carried out by qualified p...

  • Page 16

    16 !.