Glass panels installation instructions applies to the following range hood series c700, cc700, cic700, cis700, iu600es, ib700, ic700, ic700es, ik700 and is700 venmar ventilation inc., 550 lemire blvd. Drummondville qc j2c 7w9 1-800-567-3855 www.Venmar.Ca 09530 rev. 02.
Warning ! • i t is recommended to wear safety glasses and gloves while preforming these instructions . • h andle glass panel with care . • a ll tempered glass can experience spontaneous breakage . I f broken , tempered glass falls out of it ’ s opening in interlocking clumps . T empered glass can , ...
Carefully remove the new glass panel from its packaging. Remove new glass panel nuts (factory installed) from both studs and set aside. - 3 - if need be, remove current glass panel retaining nuts from both studs. Discard glass panel and nuts. Insert new glass panel studs in hood front holes. While h...
- 4 - if need be, remove current glass panel retaining nuts from both studs. Discard glass panel and nuts. Insert new glass panel studs in hood front holes. While holding glass panel, pre-tighten previously removed nuts by hand. Ensure glass panel is flush with top of hood and centered from side-to-...
If need be, remove current glass panel retaining nuts from both studs. Discard glass panel and nuts. Insert new glass panel studs in appropriate hood holes (some parts not illustrated to ease understanding). Note: install the glass panel with the control pictogram on the front of the hood. While hol...
Carefully remove the glass panel from its packaging. Remove new glass panel nuts (factory installed) from both studs and set aside. If need be, remove current glass panel retaining nuts from both studs. Discard glass panel and nuts. Insert new glass panel studs in appropriate hood holes. Note: for c...
Carefully remove the glass panel from its packaging. Remove new glass panel nuts (factory installed) from both studs and set aside. If need be, remove current glass panel retaining nuts from both studs. Discard glass panel and nuts. Insert new glass panel studs in appropriate hood holes. While holdi...
- 8 - hd0568 hd0569 f ront glass panel studs location r ear glass panel studs location hd0558 g lass panel stud n ut if need be, remove current glass panel retaining nuts from both studs. Discard glass panel and nuts. Insert new glass panel studs in appropriate hood holes. Note: install the glass pa...
