1. DL manuals
  2. Vent-a-Hood
  3. Ventilation Hood
  4. ISLAND RANGE HOOD
  5. Installation Instructions Manual

Vent-a-Hood ISLAND RANGE HOOD Installation Instructions Manual

Summary of ISLAND RANGE HOOD

  • Page 1

    Page 1 (rev. 02/08) l111 ul c us r read and save these instructions all hoods must be installed by a qualified installer installation instructions island range hood read all instructions thoroughly before beginning installation warning - to reduce the risk of fire, electric shock, or injury to perso...

  • Page 2: Ducting Do’S and Don’Ts

    Page 2 (rev. 02/08) l111 ducting do’s and don’ts never restrict the duct size. An island dual blower unit (t200) requires 8” round duct or equivalent (50 square inches). When combining ducts together, the square inch area must reflect the total square inch area of the ducts being combined. Using the...

  • Page 3: Installation Details

    Page 3 (rev. 02/08) l111 36” 8’ ceiling 30” 18” optional duct cover 36” 8’ ceiling 30” 30” installation details 1) read all instructions thoroughly before beginning installation. Note: these instructions apply to standard hoods only. Custom hoods may require additional specification consideration. 2...

  • Page 4

    Page 4 (rev. 02/08) l111 centerline of hood 8" transition opening (2) 9" above top of hood electrical (2) vent holes centerline of hood 5" x 16" exhaust opening (2) 11" 11" 9" 16" 5" 8" round 8" round 18" 9" 9" 16" 5" 8" round 8" round 30" 3" installation details continued 18” tall island connection...

  • Page 5

    Page 5 (rev. 02/08) l111 model volts amps rpm cfm sp@0.0” equivalent cfm cfm sp@0.1” cfm sp@0.2” cfm sp@0.3” minimum round duct size square inches # t200 island dual 115 3.4 1550 600 900 572 540 480 8” (or equivalent) 50 note: add 2.5 amps for each warming light and 0.5 amp for each halogen light. B...

  • Page 6

    Page 6 (rev. 02/08) l111 installation details continued 12) from inside the hood, using ul listed wire nuts, attach the “neutral” wire(s) to the white lead(s), the “hot” wire(s) to the black lead(s), and the ground wire(s) to the green lead(s). Plug the motors into the hood and reinstall the blower ...

  • Page 7

    Page 7 (rev. 02/08) l111 venting accessories 6”,7”,8” 36” vp500 6” vp501 7” vp502 8” model dim 4 1/4” 3 1/4” 10” 3 1/4” 14” back vent elbow vp559 3 1/4”x10” model dim 10 to 7 transition 7” 7 1/2” 10” 3 1/4” model dim vp521 3 1/4” x 10”- 7” low profile roof jack (maximum 4/12 pitch) 16 3/4” 6 1/2” 16...