Vent-a-Hood K250 Installation Instructions - page 4
KHSLD LINER Halogen lights only. This model not available with heat lamps. This model only available
in Black, Biscuit, Gunsmoke Gray, Stainless Steel, or White.
WALL MOUNT LINER INSERT SPECIFICATIONS
Top Vent or Back Vent
3 ¼” x 10”
The VP521 transition is available
for top vent applications
at an additional charge.
Wall Cutout for Vertical Ducting
Viewed from Above
Back of
Liner
5 1⁄8"
CL
5 1⁄8"
6 ¼"
Electrical
3 ½"
7⁄8"
2 5⁄8"
Wall Cutout for Horizontal Ducting
Viewed from Front
Top of Liner
5"
5 1⁄8"
7"
CL
*Exceeding recommended
mounting height may
compromise performance.
UL
C
US
R
36”
8’ Ceiling
21”-24”
6”
Custom
Enclosure
7”
7 ½”
3 ¼”
10”
Conection Diagrams (22 3/8", 28 3/8", 34 3/4", & 40 3/8" Widths)
Recommended
Mounting Height*
KHSLD
Electrical/Mechanical Specifications For Blower Units
Model
Volts
Amps
Hz
RPM
CFM
SP@0.0" Equivalent CFM
•
CFM
SP@0.1"
CFM
SP@0.2"
CFM
SP@0.3"
Minimum Round
Duct Size
Sones
#
K250 (Top Vent)
115
3.2
60
1550
250
375
223
220
190
7" (38 in.
2
)
7.4
K250 (Back Vent)
115
3.2
60
1550
220
330
215
195
180
7" (38 in.
2
)
7.4
All K-Series hoods have two halogen lights.
• Because the Magic Lung
®
blower uses centrifugal filtration rather than conventional baffle or mesh filters, the Magic Lung
®
blower can handle cooking equipment with higher cubic feet per minute (CFM) requirements and can deliver equivalent CFM much more
efficiently than other than other filtration systems. When comparing the Magic Lung
®
with other blower units made by other manufacturers, use the “Equivalent CFM”.
# Ratings in accordance with the Standard Test Code by the Energy Systems Laboratory of the Texas Engineering Experiment Station.
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Rev. 0709A
22 3⁄8”
, 28 3⁄8”
, 34 3⁄8”
, 40 3⁄8”
6”
18”
16 ½”
5” LESS
THAN
BOT
TOM
WID
TH
2 ½”