Vent-a-Hood RM1000 Owner And Maintenance Manual

Owner and Maintenance Guide 

Models Equipped with External

Blower RM1000/RM1500

Thank You For Choosing Vent-A-Hood

®

We  know  you  will  be  pleased  with  your  purchase  decision. 

Since 1933, our company has earned an outstanding reputation 

because  of  our  commitment  to  performance,  quality,  and 

reliability.

Safety

READ AND SAVE THESE INSTRUCTIONS

WARNING - TO REDUCE THE RISK OF FIRE, ELECTRIC 

SHOCK, OR INJURY TO PERSONS, OBSERVE THE 

FOLLOWING:

A.  Use this unit only in the manner intended by the manufacturer. 

If you have questions, call the manufacturer.

B.  Before servicing or cleaning unit, switch power off at service panel 

and lock the service disconnecting means to prevent power from 

being switched on accidentally. When the service disconnecting 

means cannot be locked, securely fasten a prominent warning 

device, such as a tag, to the service panel.

C.  Installation work and electrical wiring must be done by qualified

person(s) in accordance with all applicable codes and standards, 

including fire-related construction.

D.  Sufficient air is needed for proper combustion and exhausting

of gases through the flue (chimney) of fuel burning equipment

to  prevent  back  drafting.  Follow  the  heating  equipment 

manufacturer’s guideline and safety standards such as those 

published by the National Fire Protection Association (NFPA), 

and  the American  Society  for  Heating,  Refrigeration,  and 

Air  Conditioning  Engineers  (ASHRAE)  and  the  local  code 

authorities.

L021 0910A