Vent-Axia 3 in 1 Owner's Manual - page 9
-7
REMOTE CONTROLLER FUNCTIONS
1
2
3
4
5
7
8
Remote Controller Description
1. ON/OFF
Press it to start or stop operation.
2. MODE
Press it to select operation mode (AUTO/COOL/DRY/FAN).
3.
-
:
Press it to decrease temperature setting.
4.
+
:
Press it to increase temperature setting.
5. FAN
Press it to set fan speed.
6. BLANK
Not used on this unit.
7. SLEEP
8. TIMER
Press it to set auto-on/auto-off timer.
1. ON/OFF:
Press this button to turn on the unit. Press this button again to turn off the unit.
2. MODE:
Each time you press the button, a mode is selected in a sequence that goes from AUTO,COOL, DRY,
FAN, as follows:
AUTO
COOL
DRY
FAN
3. –
Press this button to decrease set temperature. Hold it down for above 2 seconds to rapidly decrease set
temperature. In AUTO mode, set temperature is not adjustable.
4. +
Press this button to increase set temperature. Hold it down for above 2 seconds to rapidly increase set
temperature. In AUTO mode, set temperature is not adjustable.
5. FAN:
This button is used for setting Fan Speed in the sequence that goes from AUTO, ,
to ,
then back to Auto.
Auto
Speed 1 Speed
2
Speed 3
Speed 4
When setting HIGH fan speed,unit will display TURBO fan speed.
1
3
2
4
5
7
6
8