Installation and w iring instructions installation et raccordement électrique anweisungen zur installation und v erkabelung mv250 181510a 220-240v ac 50hz 80w mv350 181010a 220-240v ac 50hz 100w mul tivent v entilation systems v entilateurs v entilatoren 453653 c 0600 head office: fleming w ay , c r...
Vent-axia multivent extractor fans - installation instructions please read all instructions carefully before starting installation. Fitting and wiring instructions should be left with the end user. Introduction the multivent range is designed for simultaneous ventilation for up to four separate area...
3. Wiring isolate mains supply before commencing wiring access to the multivent connection terminals is under the top cover which is retained by four screws. Ensure that the mains supply voltage, frequency, number of phases and power rating comply with the details on the rating label positioned unde...
Rear intake evacuation arrière hinterseitiger einlaß fig./abb. 1 fig./abb. 2 condensate drain – mounted upright drain de condensation – montage vertical abflußrohr für das kondensat – aufrechte montage condensate drain (under top cover) – vertical or suspended mounting drain de condensation (sous le...
Fig./abb. 3 fig./abb. 4 fig./abb. 5 wiring for 3-speeds selectable by external switch câblage pour 3 vitesses sélectionnables depuis un interrupteur externe schaltplan für fernbedienbare einstellung der 3 geschwindigkeitsstufen permanent wiring for fixed speed câblage permanent pour une vitesse fixe...
As part of the policy of continuous product improvement vent-axia reserves the right to alter specifications without notice. The vent-axia guarantee applicable only to products installed and used in the united kingdom. For details of guarantee outside the united kingdom contact your local supplier. ...
