V:\technical\artwork\fitting & wiring\word files holding\442073 v.Doc 442073 vcopyright © 2009 vent-axia limited. All rights reserved. Sentinel kinetic mvhr range user instructions stock ref. N° 438342 kinetic v 438222 kinetic b right 438222l kinetic b left 443319 kinetic bh right 443319l kinetic bh...
Safety information and contents sentinel kinetic mvhr user instructions 2 important safety information please read these instructions carefully before using the unit. 1. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or l...
Technical specification sentinel kinetic mvhr user instructions 3 product description sentinel kinetic sentinel kinetic f sentinel kinetic plus & sentinel kinetic high flow the vent-axia sentinel kinetic, sentinel kinetic f, sentinel kinetic plus & sentinel kinetic high flow mechanical ventilation/h...
Technical specification sentinel kinetic mvhr user instructions 4 sentinel kinetic range summer by pass models. The sentinel kinetic b, bh, fh, plus b, plus bh and high flow are fitted with a summer by pass (sbp) and will provide energy-free cooling when the house temperature and ambient temperature...
Technical specification sentinel kinetic mvhr user instructions 5 models 438342 - sentinel kinetic v without summer bypass. 438222 - sentinel kinetic b right right handed with summer bypass. 438222l - sentinel kinetic b left left handed with summer bypass. 443319 - sentinel kinetic bh right right ha...
Technical specification sentinel kinetic mvhr user instructions 6 control unit display the control unit is located at the front of the sentinel kinetic unit. The control unit provides the user interface for commissioning and monitoring purposes. Figure 3: control unit display the main display is an ...
Technical specification sentinel kinetic mvhr user instructions 7 for all other technical details, please see the product catalogue or our website at www.Vent-axia.Com . Performance sentinel kinetic sentinel kinetic f sentinel kinetic plus sentinel kinetic high flow airflow maximum, fid, 290 m 3 /h ...
Starting up sentinel kinetic mvhr user instructions 8 powering up the unit switching on (the unit is designed to run continuously) to switch the unit on: 1. Switch on the power at the mains supply isolator feeding the unit. 2. Following switch-on, the fan motors will start and the control unit will ...
Operation and monitoring sentinel kinetic mvhr user instructions 9 outdoor temp 14 c press for boost dryout mode 168 h defrost active airflow mode room too cold fan off bms fan off cvp control switched off v-- language english control mode 01 wireless control not fitted humidity sensor not fitted ai...
Operation and monitoring sentinel kinetic mvhr user instructions 10 user menu screens from the normal airflow screen, press the button to access the rest of the user menu screens. Changing the value of a setting (if adjustable) is typically a 3-step procedure: 1. Press to select the setting (the set...
Operation and monitoring sentinel kinetic mvhr user instructions 11 set clock screen from the normal airflow screen, simply press the button once to access the set clock screen. The set clock control screen enables you to change the clock settings. The clock retains its settings for approximately tw...
Operation and monitoring sentinel kinetic mvhr user instructions 12 boost & purge screens boost screen pressing the button activates boost airflow mode when extra ventilation is required. No. Of presses boost action (control mode 01) 1 boosts for 30 minutes 2 boosts for 60 minutes 3 boosts continuou...
Operation and monitoring sentinel kinetic mvhr user instructions 13 purge screen pressing and holding the button for 5 seconds activates purge mode when you want to purge air from the building. The unit will revert to normal flow by pressing and holding the button again for 5 seconds. If the wireles...
Operation and monitoring sentinel kinetic mvhr user instructions 14 defrost active screen the antifrost screen is only displayed if a summer bypass is fitted. In installations where a negative pressure is not permitted during antifrost operation, set this to bypass mode. Available options: airflow m...
Troubleshooting sentinel kinetic mvhr user instructions 15 maintenance caring for the unit heat recovery units, by their very nature, require regular maintenance. The sentinel kinetic has been designed to facilitate access to enable maintenance to be carried out easily. Filter maintenance item actio...
Troubleshooting sentinel kinetic mvhr user instructions 16 spares part no description 441768 main power board 441767 control panel 443430 temperature sensor t1 (extract air from room) 443431 temperature sensor t2 (supply air from outside) sentinel kinetic spares 442356 g3 filters, 2 per pack (438222...
Troubleshooting sentinel kinetic mvhr user instructions 17 troubleshooting diagnosing a problem in the event of a problem, always troubleshoot the unit according to: fault code displayed on the control unit or remote wired control. Fault led if connected. If no indications are displayed, then troubl...
Appendix one: control mode 02 description overview the functional differences described in this appendix are available when control mode 02 is selected from the start-up screens. Control mode 02 assigns alternative functions to certain wiring terminal connections (described in appendix one of the in...
Appendix two: spare filters model filter part no. Grade kinetic v,b & bh 442356 (pk2) g3 444199 (single) m5 kinetic fh 409764 (pk2) g3 472153 (single) m5 kinetic plus and kinetic high flow 403702 (pk2) g3 444201 (single) m5 appendix two.
Appendix one head office: fleming way, crawley, west sussex, rh10 9yx. Uk national call centre, newton road, crawley, west sussex, rh10 9ja sales enquiries: tel: 0344 8560590 fax: 01293 565169 technical support tel: 0344 8560594 fax: 01293 532814 for details of the warranty and returns procedure ple...
