Opal aluminium radiator heater range stock ref. N° 448469 vaar500 448470 vaar750 448471 vaar1000 448472 vaar1250 448473 vaar1500 installation and wiring instructions please read instructions in conjunction with illustrations. Please save these instructions.
2 * this appliance has been designed to be fixed to a wall. Please read these instructions carefully before starting the installation. * this heater is filled with a precise quantity of special oil. Repairs requiring the opening of the heater should be carried out by a qualified service engineer. * nev...
3 min 15 cm min 15 cm min 15 cm min 15 cm 1 2 min 60 cm min 60 cm template minimum distances to avoid problems it is necessary to keep a minimum distance of 15 cm between the heater and any combustible materials. 2.1 it is important that the heater is fixed firmly to a solid and levelled wall. 2.2 m...
4 6 1 3 2 1. To place 2. To let 3. To place 7.1 then connected the power supply cord to a double pole isolating switch. 7.2 make sure that the heater is perfectly fixed to the wall to avoid future risks. Important: to have the heater perfectly fixed to the wall, screw completely the 6 x 50 mm screws i...
5 1. Standby 2. Manual mode 3. Program menu 4. Navigation keys (+, -, ok) 5. On / off for the display 6. Economic led 7. Comfort led 8. Program setting leds 1 2 3 4 5 6 7 8 5.1 start up press = “stand-by” press pr : hd 1 2 5.2 mode manual 1 2 3 press the room temperature appears the led is lit up 17...
6 press 4 5 22.0 c press mark the desired comfort temperature, for example 22 ºc. Or 6 17.5 c the actual room temperature will appear again. The heater will start heating up till it reaches the marked temperature, in this case 22 ºc. 5.3 programming mode the heater is programmed with 7 plans during ...
7 1 2 3 press 2 seg.: press: 4 5 press programming the hour. Programming the minutes. You can change the language (english, french, spanish) pressing: or or press press 6 7 press press programme the day of the week. Or press 00 : 00 hour 23 : 00 day dd mo 8 9 press press mark the desired comfort tem...
8 12 13 press choose the programme or plan you desire. Or press plan pl 01 14 press to put into action this plan. Press 5.4 plan according to your requirements if none of the 7 programmes correspond to your heating needs, we are going to explain how you can configure your own heating system plan. 1 ...
9 7 8 press choose 06:00 h. Or press 06:00 9 now we are going to introduce the start of the first economy period from monday to friday. The economy, first period p1 and days monday to friday leds will light up. In our case, the first economy period starts at 9:00 h. 9 6 now we are going to introduce...
10 16 now if you wish, you can programme the period regarding saturday and sunday. 10 11 press choose 09:00 h. Or press 09:00 12 now we are going to programme period p2 and period p3. Press choose 14:00 h. Or press 14:00 press choose 18:00 h. Or press 18:00 14 13 press choose 20:00 h. Or press 20:00...
11 17 when you finish programming, press the button “prog”. The room temperature will appear on the display. You have just designed a heating system plan. 6 switching off the display important if you do not require a set time period, you must put the hour of this period at “00:00”. As you can see, w...
12 7 locking the controls 8 standby mode this mode will maintain all the program parameters. 9 disconnecting the electrical supply from the heater if the switch-off time exceeds 24 hours, the current date and time will have to be re-programmed (pag. 9). Press: = “stand-by” - to activate the function...
Head office: fleming way, crawley, west sussex, rh10 9yx. Tel: 01293 526062 fax: 01293 551188 uk national call centre, newton road, crawley, west sussex, rh10 9ja sales enquiries: tel: 0844 8560590 fax: 01293 565169 technical support: tel: 0844 8560594 fax: 01293 532814 web:-www.Vent-axia.Com email:...
