Venta Airwasher LW24Plus User Manual - page 6
6
Oper
햲
Before First Use
1 Place the unit upright on a firm, flat surface. For proper air circulation make sure the
vented sides are at least 18-20” clear of any wall. Do not block airflow inlets and
outlets. Unrestricted airflow will result in the best efficiency and performance of your
Venta-Airwasher.
2 Inspect the switching power supply to insure it is free of damages.
3 Make sure the upper housing is removed from the lower housing.
4 Place disk stack(s) into lower housing.
5 Add fresh tap water. Fill water to the fill line
located approximately one (1) inch below
the top on the inside of the lower housing.
You can transport the lower housing to your
sink or tub – or you may fill the lower
housing by carrying the water in a pitcher or
watering can to the lower housing. Be
careful when filling, cleaning, or moving the
Venta-Airwasher to avoid water spills.
Do not fill your Venta through the air
intake holes on top of the upper
housing.
6 LW 24 Plus: Add the entire contents of one
sample bottle. LW 44 Plus: Add the entire
contents of both sample bottles.
7 Place upper housing properly on top of lower housing.
8 Plug switching power supply into standard 110-120 V AC outlet.
9 See “Daily Use and Operation” on page 7.
UPPER HOUSING
DISK STACK
LOWER HOUSING
Daily U
■
Swit
rota
■
Sele
■
To s
light
sho
■
The
by d
shut
LW Plus Bedien. USA-CAN sw 1-2 2011_. 02.05.11 09:16 Seite 6