Venta-Sonic VS 207 User Manual - page 6
6
Trouble Shooting
What should I do if my Venta-Sonic™‚ does not produce mist?
Insure that the water tank is properly set on its base. Make sure all air bubbles are out
by tapping the tank with your finger until all air has escaped.
What should I do if the power indicator is on but there is no mist?
This may be caused by mineral deposits in the water channels. Try the following: Clean
the water tank, base and vapor nozzle with a damp cloth to remove any build-up in the
water channel.
What should I do if my Venta-Sonic™‚ produces no mist, and the power indicator
light is not on?
Check if the plug is connected to a live 110-120V AC outlet. Check if there is water in
the chamber underneath the tank. Check if the unit is positioned on a flat surface.
What should I do if water in the unit will not flow down from the tank to the reservoir?
Gently wiggle the tank while watching for the air bubbles indicating that the water is
running down to the reservoir. Remove the tank and reset on the base. Tap the tank
Slightly. Check the demineralization cartridge; replace if necessary.