VentAHood JCH/B1 Series Installation Instructions Manual

Summary of JCH/B1 Series

  • Page 1

    Jch/b1 series equipped with led lighting. Not available with heat lamps. Shown with optional duct cover (sold separately). Optional duct covers available in standard and custom sizes. Designer series wall mount range hood ul c us r optional duct cover centerline of hood wall side electrical (2) 10" ...

  • Page 2: Installation Instructions

    Page 1 jch/b1 0915a ul c us r read and save these instructions all hoods must be installed by a qualified installer installation instructions jch/b1 designer series wall mount hood read all instructions thoroughly before beginning installation warning - to reduce the risk of fire, electric shock, or...

  • Page 3: Ducting Do’S and Don’Ts

    Page 2 jch/b1 0915a ducting do’s and don’ts yes no smooth duct smooth gradual turn proper combining of two ducts flexible duct sharp angled turns improper combining of two ducts general requirements • observe local codes regarding special duct requirements and placement of duct against combustibles....

  • Page 4: Installation Details

    Page 3 jch/b1 0915a 36" 30" installation details 1) read all instructions thoroughly before beginning installation. 2) when installing a jch/b1 wall mount range hood, it is recommended that the bottom edge of the hood be located no more than 30” above the cooking surface for optimum performance. 3) ...

  • Page 5

    Page 4 jch/b1 0915a electrical 1 ¾” centerline of hood 8” outlet vent holes 5 ¼” 5 ½” wall side centerline of hood wall side electrical (2) 10" outlet centered on hood top 12 7⁄8” 9 1⁄8” 1 ¾” duct cover (top of hood) 10" dia. Or 12" dia. Transition location "centered" wall side 7" electrical (2) cen...

  • Page 6

    Page 5 jch/b1 0915a installation details continued 8) if the duct cover is not factory-installed on the hood, remove the duct cover from its packaging and remove the mounting screws from the base of the duct cover. Place the duct cover on the top of the hood and secure it to the hood using the mount...

  • Page 7

    Page 6 jch/b1 0915a 11) for back venting applications only. If not back venting, proceed directly to step 12. Note: wall studs may interfere with back venting installations. Additional framing may be required. It is necessary to cut a duct access hole in the wall prior to installing the hood. To acc...

  • Page 8: Venting

    Page 7 jch/b1 0915a venting accessories 6” rectangular duct pipe model dim vp507 6” x 8 ½” 24” 8 ½” 6” round duct pipe model dim vp500 vp501 vp502 6” round 7” round 8” round 36” 6” 7” 8” 3 ¼” rectangular duct pipe model dim vp504 vp505 vp506 3 ¼” x 10” 3 ¼” x 12” 3 ¼” x 16” 30” 10” 12” 16” 3 ¼” offs...

  • Page 9

    Back vent applications (page 1 of 4) hood model/hood style back vent diagram k250 (3-1/4” x 10”) b100 (6” round) b200 (8” round) b300 (8” round & 6” round) b400 (two 8” round) k-series under cabinet hood and liner insert a standard n/a n/a n/a n/a 6” under cabinet (excluding k-series) b n/a vp513 vp...

  • Page 10

    Diagram a - direct back vent (drawing not to scale) side view 3 1/4” x 10” rectangular diagram b - off the top (drawing not to scale) side view vp513 - 6” round vp515 - 8” round vp561 - 8” round to 6” x 8 1/2” rectangular 8” round diagram c - within the height of the hood (drawing not to scale) side...

  • Page 11

    10” 4 ¼” 3 ¼” hood c/l level of blower deck 6” 8 ½” 3 ¼” hood c/l level of blower deck 8” 10 ¾” hood c/l level of blower deck 6” 7” hood c/l level of blower deck 8 ½” vp513 - 6” round vp515 - 8” round vp561 - 8” round to 6” x 8 1/2” rectangular vp559 - 3 1/4” x 10” rectangular back vent applications...

  • Page 12

    8” 10 ¾” 6” 8 ½” level of blower deck hood c/l 14 ⁄ ” 7 ⁄ ” 7 ⁄ ” 6” 7” 8 ½” 6” 8 ½” level of blower deck hood c/l 14 ⁄ ” 7 ⁄ ” 7 ⁄ ” vp513 - 6” round vp515 - 8” round vp561 - 8” round to 6” x 8 1/2” rectangular back vent applications (page 3 of 4) note: excluding the slh6-k, under cabinet...

  • Page 13

    8” 10 ¾” level of blower deck hood c/l 22” 11” 11” 8” 10 ¾” 8 ½” 8 ½” 6” 7” level of blower deck hood c/l 22” 11” 11” 6” 7” vp513 - 6” round vp515 - 8” round vp561 - 8” round to 6” x 8 1/2” rectangular back vent applications (page 4 of 4) note: excluding the slh6-k, under cabinet range hood and the ...

  • Page 14

    Page the information in this document is subject to change at any time without notice. Vent-a-hood venting accessories wall louver 6” 7” 8” 8 5⁄8” back view 1 ½” flange wall louver 11” 11” back view 1 ½” flange wall louver 13” 13” back view 1 ½” flange rectangular wall louver 3 ¼” 10” 8 ½” 6” 1 ½” f...

  • Page 15

    Page the information in this document is subject to change at any time without notice. Parts for vent-a-hood products motors part no. Description price p1301-1 single speed white motor (cw) p1301-2 two speed white motor (cw) p1302-1 black motor (ccw) p1315 k series motor p1900 adapter (amp plug/two ...