1. DL manuals
  2. Ventamatic
  3. Fan
  4. VX25 series
  5. Installation Manual

Ventamatic VX25 series Installation Manual

Summary of VX25 series

  • Page 1

    Installation instructions a leader in the ventilation industry for over 60 years, ventamatic, ltd. Offers a complete line of air movement products for commercial, industrial, agricultural, and residential use sold under these fine names: ® ® ventamatic, ltd. P.O. Box 728, mineral wells, tx 76068-072...

  • Page 2: Installation Instructions

    The vx25 series static ventilator provides 144 square inches of net free area, which will ventilate a 500 sq ft attic. For larger attics, use two or more ventilators. Attic ventilators operate most efficiently when air intakes are located around the eaves. At least 600 square inches of air intake ve...

  • Page 3

    Figure 1: ventilator location figure 2: nailing pattern the ventilator should be located in the center of the roof (between the two ends of the house) and about 8" down from the ridgeline. The ventilator should be visible from one side of the roof only. Use the nailing pattern at right for greatest ...

  • Page 4: Two-Year Limited Warranty

    Ventamatic, ltd., hereinafter referred to as manufacturer, extends a warranty to the original occupying owner of the home where the product is installed. No subsequent purchaser of the product or of the home on which it is installed is entitled to the benefits of the warranty. 1. This warranty perio...