Vento URAGANO Assembly And Installation Manual - page 8
Reversible Switch
Tighten screws at the bottom of the blades using screws and plastic washers. Please
note that the plastic washers must be placed in between the screws and blades. Fit
the cover to the fan body and turn to lock it into position.
Cover
Washers
Screws
9.
- 7 -
- 6 -
WINTER MODE
SUMMER MODE
WINTER MODE: The reversible switch is in the “right” position to make the airflow will
be directed upwards for energy conservation in winter.
Reversible switch: switch to the left is downward airflow and switch to the right is upward
airflow. (The illustration for user reference only, the actual airflow depends on on-site
situation.)
NOTE: Set the reversible switch when the fan stops completely.
10.
SUMMER MODE: The reversible switch is in the “left” position to make the airflow will
be directed downwards for cooling in summer.
8. Insert the receiver into the
mounting bracket
(see the illustration on page 9-11 ). Loosen
the screws from the
mounting bracket
, uphold the canopy to cover the
mounting bracket
,
then let the mounted hole aim at the screws, then firm the screws.
ATTENTION: Make sure all wires are proper connected.