1. DL manuals
  2. Ventrac
  3. Utility Vehicle
  4. KW450
  5. Operator's Manual & Parts Drawings

Ventrac KW450 Operator's Manual & Parts Drawings

Manual is about: Weather Cab

Summary of KW450

  • Page 1

    O perator ’ s m anual & p arts d rawings w eather c ab m odel kw450 revised 03/11/16 09.10083 rev. 04 original operator’s manual.

  • Page 2

    2 500 venture drive po box 148 orrville oh 44667 www.Ventrac.Com to the owner contact information and product identification if you need to contact an authorized ventrac dealer for information on servicing your product, always provide the product model and serial numbers. Please fill in the followin...

  • Page 3

    Blank page.

  • Page 4: Table of Contents

    Table of contents 4 introduction page 6 product description ................................................................................................................................6 why do i need an operator’s manual? .............................................................................

  • Page 5: Table of Contents

    Table of contents 5 service page 31 cleaning & general maintenance ........................................................................................................31 seatbelt upper mount adjustment .................................................................................................

  • Page 6: Introduction

    Introduction - 6 product description the ventrac kw450 weather cab is designed for the sole purpose of sheltering the operator from the weather while providing superior visibility. Standard features include a front windshield wiper, front and rear led work lights, a large left-side entry door, right...

  • Page 7: Introduction

    Introduction introduction - 7 using your manual throughout this manual, you will encounter special messages and symbols that identify potential safety concerns to help you as well as others avoid personal injury or damage to the equipment. Attention this symbol identifies potential health and safety...

  • Page 8: Safety

    Safety - 8 safety decals the following safety decals must be maintained on your kw450 weather cab. Keep all safety decals legible. Remove all grease, dirt, and debris from safety decals and instructional labels. If any decals are faded, illegible, or missing, contact your dealer promptly for replace...

  • Page 9: Safety

    Safety safety - 9 decal description part number quantity a warning, pinch point 00.0218 2 b warning, kw350 00.0272 1 c danger, gasoline only 00.0332 1 d danger, diesel only 00.0333 1 a b 1 2 c d.

  • Page 10: Safety

    Safety safety - 10 general safety procedures for ventrac power units, attachments, & accessories training required • the owner of this machine is solely responsible for properly training the operators. • the owner/operator is solely responsible for the operation of this machine and prevention of acc...

  • Page 11: Safety

    Safety safety - 11 general safety procedures for ventrac power units, attachments, & accessories operation safety (continued) • if equipped with a high/low range feature, never shift between high and low range while on a slope. Always move the machine to level ground and engage the parking brake bef...

  • Page 12: Safety

    Safety safety - 12 general safety procedures for ventrac power units, attachments, & accessories operating on slopes • slopes can cause loss-of-control and tip-over accidents, which can result in severe injury or death. Be familiar with the emergency parking brake, along with the power unit controls...

  • Page 13: Safety

    Safety safety - 13 general safety procedures for ventrac power units, attachments, & accessories maintenance • keep all safety decals legible. Remove all grease dirt, and debris from safety decals and instructional labels. • if any decals are faded, illegible, or missing, contact your dealer promptl...

  • Page 14: Safety

    Safety safety - 14 general safety procedures for ventrac power units, attachments, & accessories • do not overfill fuel tank. Only fill to bottom of fuel neck, do not fill fuel neck full. Overfilling of fuel tank could result in engine flooding, fuel leakage from the tank, and/or damage to the emiss...

  • Page 15: Safety

    Safety safety - 15 • warning 10 degree maximum angle of operation of power unit with weather cab installed. Caution do not exceed 30 amp draw to weather cab and additional accessories. The cab door must be closed and latched during operation of power unit and kw450 weather cab. • window latches must...

  • Page 16

    Setup - 16 weather cab setup instructions identification of parts 23 10 9 2 6 4 19 20 15 1 21 22 18 24 12 17 16 5 7 8 11 3 13 14.

  • Page 17

    Weather cab setup instructions setup - 17 31 30 26 25 28 29 27 33 32 ref. Name qty. 1 sling, 4 point assy 1 2 cushion, headrest 1 3 mount, seatbelt upper (w/seatbelt) 1 4 cover, pump w/flanges 1 5 window, lower rear canvas 1 6 cover, fuel tank kw450 1 7 canvas, rear frame 1 8 support, cab front rh 1...

  • Page 18

    Weather cab setup instructions setup - 18 setup instructions for power unit & weather cab installation time (estimated) 3.0 hours use only the kw450 lift sling attached at all four lift points to lift the cab. Never walk or stand beneath cab when it is raised off the ground. Place wheel chocks in fr...

  • Page 19

    Weather cab setup instructions setup - 19 7. If your power unit does not have lower mounting holes, install the included template onto the right side of the lower rear frame. Fasten to the exist- ing holes using included 5/16 bolts and nuts, making sure to keep the template parallel with the top sur...

  • Page 20

    Weather cab setup instructions setup - 20 16. Remove the right and left foot pegs from the power unit front frame. Reinstall bolts and tighten. 17. Remove the right dash access panel. 18. Install the right canvas column mount and the dash access panel onto the dash using 2) 1/4” x 3/4” button head b...

  • Page 21

    Weather cab setup instructions setup - 21 27. Place the wire harness in the power unit’s seat box area. Connect the ring terminal to the ground stud (n). Route the wire with the terminal along the main harness into the tool box area. Use zip ties to fasten the wires to the main harness. 28. N use a ...

  • Page 22

    Weather cab setup instructions setup - 22 38. Remove the existing seat belt from the power unit. Install the seatbelt upper mount to the back edge of the roll bar as shown below. Install 2) u-bolts from the front of the roll bar through the holes in the seatbelt upper mount. Center the seatbelt uppe...

  • Page 23

    Weather cab setup instructions setup - 23 44. Install the rear cab 13-5/8” parallel with top face of the seat box panel. Mounts onto the roll bar using 2) u-bolts and 4) 3/8” locking flange nuts. The bottom face of the mounting flange should be parallel to the top face of the seat box panel and appr...

  • Page 24

    Weather cab setup instructions setup - 24 53. Lift the weather cab and position it over the power unit. 54. Use only the kw450 lift sling attached at all four lift points to lift the cab. Never walk or stand beneath cab when it is raised off the ground. Lower the cab onto the power unit. Insert a 1/...

  • Page 25

    Weather cab setup instructions setup - 25 60. Align the gas door shock end with the mount- ing stud on the cab frame and press until shock end snaps over the head of the mounting stud. 61. The gas door shock must be installed to prevent the door from opening too far or swinging open or shut too fast...

  • Page 26

    Weather cab setup instructions setup - 26 67. Lay out the velcro facing down right left canvas bellows with the velcro on the triangular windows facing down. Identify the left and right bellows as shown. 68. Install a bellows support strap through both the top and bottom sets of holes on the left an...

  • Page 27: Caution

    Weather cab setup instructions setup - 27 78. Jj caution do not exceed 30 amp draw to weather cab and additional accessories. Install the 30 amp circuit breaker into slot 2 of the rear fuse panel. 79. If the power unit is equipped with a gasoline engine, install the gasoline safety decal onto the ca...

  • Page 28: Operational Controls

    Operational controls operation - 28 operational control locations the images above match with the following refer- ence letters to help identify the location of operational controls for the kw450 weather cab. A - outer door handle & lock b - inner door handle c - emergency exit/window latch handle d...

  • Page 29: Operational Controls

    Operational controls operation - 29 outer door handle & lock (a) push the button on the outer door handle to unlatch the door. The outer door handle can be locked with a key. Turn the key clockwise to lock and counter- clockwise to unlock the door. Inner door handle (b) squeeze the button on the inn...

  • Page 30: General Operation

    General operation operation - 30 daily inspection 1. Always set the parking brake, shut off power unit engine, remove the ignition key, and ensure all moving parts have come to a complete stop before inspecting components or attempting any repair or adjustment. Park machine on a level surface, with ...

  • Page 31: Service

    Service service - 31 cleaning & general maintenance for best results, and to maintain the finish of the kw450, clean or wash the weather cab to remove dirt, gravel, and salt deposits. Remove any ice or snow accumulations from the roof, windows, and accessories. Attention to maintain the finish of th...

  • Page 32: Service

    Service service - 32 wiper blade replacement the wiper blade should be replaced on a yearly basis, or sooner if the blade does not clean the windshield effectively. 1. Remove the nut and bolt (a) that fasten the wiper blade to the wiper arm. 2. Install new wiper blade and reinstall the nut and bolt....

  • Page 33: Service

    Service service - 33 heater air filter replacement the 2) heater air intake filters should be replaced on a yearly basis, or sooner if operating in dusty conditions. 1. Remove the 2) thumb screws (a) holding each filter cover (b) onto the cab. 2. B b a a a a remove both air filters (c) from the cab ...

  • Page 34: Service

    Service service - 34 storage preparing the weather cab for storage 1. Clean the weather cab. 2. Attention to maintain the finish of the power unit and attach- ment, thoroughly wash the equipment to remove any corrosive agents (e.G., salt). Failure to clean the equip- ment may result in corrosion of ...

  • Page 35: Service

    Service service - 35 15. Remove the rear cab mounts from the power unit roll bar and store with the cab. 16. Loosen the 1/2” bolts that fasten the front cab supports to the front cab mounts, but do not remove. Remove the front cab mounts from the power unit foot platform and store with the cab. 17. ...

  • Page 36: Specifications

    Specifications specifications - 36 dimensions overall height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51 in. (129.5 cm) overall length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58 in. (147.3 cm) overall width . . . . . . . . . . . . . . . . . . ...

  • Page 37: Parts

    Illustrated parts - 37 use only original ventrac replacement parts. Illustrated drawing electrical diagram 7 8 6 5 2 4 3 1 a b c d e f g h i j k 9/24/2009 swartz 70.2006_wiring_schematic headliner, kw350 assembly kw350 in work production status title: part # drawn by: date: size size: bin: dimension...

  • Page 38: Parts

    Parts illustrated parts - 38 use only original ventrac replacement parts. Illustrated drawing cab frame & mount 5 5 5 5 6 6 17 15 16 18 8 8 8 20 19 7 7 7 7 20 19 10 10 1 1 1 1 3 3 3 3 4 4 4 4 4 4 9 9 9 9 2 2 2 2 19 20 19 20 14 21 11 12 13 22.

  • Page 39: Parts

    Parts illustrated parts - 39 use only original ventrac replacement parts. Cab frame & mount ref. Part no. Description qty. 1 . . . . . . . . . 99.B0095 . . . . . . . . . . . . . . . . . . .Washer, .531 x 1.75 3/16 thick . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Page 40: Parts

    Parts illustrated parts - 40 use only original ventrac replacement parts. Illustrated drawing cab headliner & roof mount 12 12 12 12 12 13 13 13 13 9 9 8 8 4 7 5 5 6 6 14 14 14 14 11 11 11 11 10 10 10 10 3 3 3 3 1 1 1 1 2 2 2 2.

  • Page 41: Parts

    Parts illustrated parts - 41 use only original ventrac replacement parts. Cab headliner & roof mount ref. Part no. Description qty. 1 . . . . . . . . . 99.E0046 . . . . . . . . . . . . . . . . . . .Nut, “u” 1/4-20 extruded . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....

  • Page 42: Parts

    Parts illustrated parts - 42 use only original ventrac replacement parts. Illustrated drawing headliner assembly 4 4 4 4 3 3 3 20 21 28 24 6 13 13 17 17 25 15 2 2 2 2 9 9 23 7 8 8 8 8 8 8 8 8 27 18 18 18 18 19 16 16 16 26 22 14 12 12 1 1 1 1 5 5 5 5 5 5 5 5 5 5 11 11 10 10 10 10 10 10

  • Page 43: Parts

    Parts illustrated parts - 43 use only original ventrac replacement parts. Headliner assembly ref. Part no. Description qty. 1 . . . . . . . . . 99.E0046 . . . . . . . . . . . . . . . . . . .Nut, “u” 1/4-20 extruded . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....

  • Page 44: Parts

    Parts illustrated parts - 44 use only original ventrac replacement parts. 3 3 3 5 1 2 2 4 4 4 6 6 6 20 21 22 illustrated drawing front & rear work lights.

  • Page 45: Parts

    Parts illustrated parts - 45 use only original ventrac replacement parts. Ref. Part no. Description qty. 1 . . . . . . . . . 30.0317 . . . . . . . . . . . . . . . . . . . .Fuse, 10 amp atc blade - red . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 2 . . . ....

  • Page 46: Parts

    Parts illustrated parts - 46 use only original ventrac replacement parts. Illustrated drawing canvas bellows & column covers 2 2 16 17 12 13 3 3 3 3 19 4 15 1 1 1 1 1 1 5 5 5 5 5 5 5 5 14 6 6 7 8 8 8 9 10 10 11 11 18.

  • Page 47: Parts

    Parts illustrated parts - 47 use only original ventrac replacement parts. Canvas bellows & column covers ref. Part no. Description qty. 1 . . . . . . . . . 95.04 . . . . . . . . . . . . . . . . . . . . . .Washer, flat 1/4 sae . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Page 48: Parts

    Parts illustrated parts - 48 use only original ventrac replacement parts. Illustrated drawing front windshield & windshield wiper 18 10 10 8 5 5 5 5 5 5 5 4 4 4 4 4 4 4 20 3 3 3 3 3 3 3 14 7 19 21 16 15 17 11 11 9 9 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 12 12 12 12 12 12 12 13 13 13 13 13 13 13 1 1 1 1 1 ...

  • Page 49: Parts

    Parts illustrated parts - 49 use only original ventrac replacement parts. Front windshield & windshield wiper ref. Part no. Description qty. 1 . . . . . . . . . 99.K0115 . . . . . . . . . . . . . . . . . . .Bolt, step ¼-20x1-1/4 black . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....

  • Page 50: Parts

    Parts illustrated parts - 50 use only original ventrac replacement parts. Illustrated drawing upper door frame & latch 19 19 25 17 17 17 17 17 17 16 18 18 26 21 21 15 32 27 28 34 24 13 33 11 11 14 36 35 12 12 30 22 22 23 23 23 20 20 7 7 9 6 6 8 2 2 2 2 2 10 10 31 29 3 3 3 3 3 3 3 3 3 3 5 5 5 5 5 4 4...

  • Page 51: Parts

    Parts illustrated parts - 51 use only original ventrac replacement parts. Upper door frame & latch ref. Part no. Description qty. 1 . . . . . . . . . 99.Sf06 . . . . . . . . . . . . . . . . . . . .Nut, sf 3/8-16 uss . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Page 52: Parts

    Parts illustrated parts - 52 use only original ventrac replacement parts. Illustrated drawing lower door 6 6 6 6 5 5 5 5 11 10 13 4 4 4 4 3 15 14 9 9 7 8 8 12 12 1 1 1 1 2 2 2 2.

  • Page 53: Parts

    Parts illustrated parts - 53 use only original ventrac replacement parts. Lower door ref. Part no. Description qty. 1 . . . . . . . . . 99.K0119 . . . . . . . . . . . . . . . . . . .Bolt, step ¼-20 x 1-1/2 blk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Page 54: Parts

    Parts illustrated parts - 54 use only original ventrac replacement parts. Illustrated drawing left rear window 11 11 14 14 17 8 9 9 9 9 9 9 9 9 10 10 16 7 15 15 6 6 13 13 18 12 12 12 19 4 4 4 4 5 5 5 2 2 2 2 3 3 3 3 1 1 1 1 1 1.

  • Page 55: Parts

    Parts illustrated parts - 55 use only original ventrac replacement parts. Left rear window ref. Part no. Description qty. 1 . . . . . . . . . 99.Sf06 . . . . . . . . . . . . . . . . . . . .Nut, sf 3/8-16 uss . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Page 56: Parts

    Parts illustrated parts - 56 use only original ventrac replacement parts. Illustrated drawing rear window 8 8 8 8 8 8 8 8 8 8 8 8 8 9 9 9 9 9 9 9 9 9 9 9 9 9 7 7 7 7 7 7 7 6 6 6 6 6 6 6 25 5 5 5 5 5 5 5 24 23 16 17 19 18 11 11 10 10 12 12 12 12 12 12 4 4 1 1 1 1 1 1 1 2 2 2 2 2 2 2 2 2 3 3 21 13 13 ...

  • Page 57: Parts

    Parts illustrated parts - 57 use only original ventrac replacement parts. Rear window ref. Part no. Description qty. 1 . . . . . . . . . 99.K0115 . . . . . . . . . . . . . . . . . . .Bolt, step ¼-20x1-1/4 black . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....

  • Page 58: Parts

    Parts illustrated parts - 58 use only original ventrac replacement parts. Illustrated drawing right rear window 10 10 14 14 19 18 8 8 8 8 8 8 8 8 9 9 16 7 15 15 6 6 13 13 12 11 11 11 17 4 4 4 4 5 5 5 2 2 2 2 3 3 3 3 1 1 1 1 1 1.

  • Page 59: Parts

    Parts illustrated parts - 59 use only original ventrac replacement parts. Right rear window ref. Part no. Description qty. 1 . . . . . . . . . 99.Sf06 . . . . . . . . . . . . . . . . . . . .Nut, sf 3/8-16 uss . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....

  • Page 60: Parts

    Parts illustrated parts - 60 use only original ventrac replacement parts. Illustrated drawing right front window/emergency exit 13 13 8 17 19 11 11 11 11 11 11 11 11 12 12 9 15 15 10 7 7 18 14 4 4 4 4 16 6 6 2 2 2 2 2 2 5 3 3 3 3 3 3 1 1 1 1.

  • Page 61: Parts

    Parts illustrated parts - 61 use only original ventrac replacement parts. Right front window/emergency exit ref. Part no. Description qty. 1 . . . . . . . . . 99.Sf06 . . . . . . . . . . . . . . . . . . . .Nut, sf 3/8-16 uss . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....

  • Page 62: Parts

    Parts illustrated parts - 62 use only original ventrac replacement parts. Illustrated drawing lower right window 6 6 6 6 5 5 5 5 10 8 4 4 4 4 3 9 7 1 1 1 1 2 2 2 2.

  • Page 63: Parts

    Parts illustrated parts - 63 use only original ventrac replacement parts. Lower right window ref. Part no. Description qty. 1 . . . . . . . . . 99.K0119 . . . . . . . . . . . . . . . . . . .Bolt, step ¼-20 x 1-1/2 blk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Page 64: Parts

    Parts illustrated parts - 64 use only original ventrac replacement parts. Illustrated drawing four point seatbelt 14 5 8 8 8 4 4 15 12 13 10 10 7 7 7 7 9 9 9 9 9 9 9 9 6 6 6 6 6 6 6 6 6 6 6 6 11 11 3 3 1 1 1 1 2 2.

  • Page 65: Parts

    Parts illustrated parts - 65 use only original ventrac replacement parts. Four point seatbelt ref. Part no. Description qty. 1 . . . . . . . . . 99.E0082 . . . . . . . . . . . . . . . . . . .Nut, locking flange 3/8-16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Page 66: Parts

    Parts illustrated parts - 66 use only original ventrac replacement parts. Illustrated drawing fuel tank cover, seals, wire harness 6 6 10 9 8 5 5 14 7 16 13 11 3 3 3 3 2 2 1 1 1 1 15 4 4 12 17 18.

  • Page 67: Parts

    Parts illustrated parts - 67 use only original ventrac replacement parts. Fuel tank cover, seals, wire harness ref. Part no. Description qty. 1 . . . . . . . . . 99.Sf04 . . . . . . . . . . . . . . . . . . . .Nut, sf 1/4-20 uss . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Page 68: Parts

    Parts illustrated parts - 68 use only original ventrac replacement parts. Illustrated drawing 70.2005-2 directional signal/flasher kit 2 2 2 2 3 1 5 4 07.0100903 21 20 22.

  • Page 69: Parts

    Parts illustrated parts - 69 use only original ventrac replacement parts. 70.2005-2 directional signal/flasher kit ref. Part no. Description qty. 1 . . . . . . . . . 30.0166 . . . . . . . . . . . . . . . . . . . .Fuse, 15 amp atc blade - blue . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....

  • Page 70: Parts

    Parts illustrated parts - 70 use only original ventrac replacement parts. Illustrated drawing 70.2006-3 strobe beacon kit 15 6 11 8 8 9 12 14 10 13 16 5 5 4 4 3 7 7 18 18 18 1 1 2 2 33.0049 33 30 31 32 17 17 17 19.

  • Page 71: Parts

    Parts illustrated parts - 71 use only original ventrac replacement parts. 70.2006-3 strobe beacon kit ref. Part no. Description qty. 1 . . . . . . . . . 99.Sf04 . . . . . . . . . . . . . . . . . . . .Nut, sf 1/4-20 uss . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....

  • Page 72: Parts

    Parts illustrated parts - 72 use only original ventrac replacement parts. Illustrated drawing 70.2006-4 mirror kit 9 9 10 10 10 10 11 11 7 7 8 8 6 6 3 3 12 12 12 12 2 2 2 2 4 4 1 1 1 1 5 5.

  • Page 73: Parts

    Parts illustrated parts - 73 use only original ventrac replacement parts. 70.2006-4 mirror kit ref. Part no. Description qty. 1 . . . . . . . . . 99.E0082 . . . . . . . . . . . . . . . . . . .Nut, locking flange 3/8-16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....

  • Page 74: Parts

    Parts illustrated parts - 74 use only original ventrac replacement parts. Illustrated drawing 70.2006-6 defrost fan kit 3 2 2 2 1 1 1.

  • Page 75: Parts

    Parts illustrated parts - 75 use only original ventrac replacement parts. 70.2006-6 defrost fan kit ref. Part no. Description qty. 1 . . . . . . . . . 99.K0047 . . . . . . . . . . . . . . . . . . .Machine screw, #10-32 x 3/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....

  • Page 76: Parts

    Parts illustrated parts - 76 use only original ventrac replacement parts. Illustrated drawing 70.8106 console fan/heater kit 15 5 5 5 4 4 4 4 13 13 14 16 3 18 8 8 11 11 17 12 7 7 6 6 10 10 10 10 10 10 2 1 1 1 1 9 19 19 19 19.

  • Page 77: Parts

    Parts illustrated parts - 77 use only original ventrac replacement parts. 70.8106 console fan/heater kit ref. Part no. Description qty. 1 . . . . . . . . . 99.E0046 . . . . . . . . . . . . . . . . . . .Nut, “u” 1/4-20 extruded . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....

  • Page 78: Parts

    Parts illustrated parts - 78 use only original ventrac replacement parts. Illustrated drawing 70.8136 kubota heater install kit for 4500y & 4500z.

  • Page 79: Parts

    Parts illustrated parts - 79 use only original ventrac replacement parts. 70.8136 kubota heater install kit for 4500y & 4500z ref. Part no. Description qty. 1 . . . . . . . . . 29.Bf06mbspt06 . . . . . . . . . . .Fitting, 3/8 brb x 3/8 m bspt . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....

  • Page 80: Parts

    Parts illustrated parts - 80 use only original ventrac replacement parts. Illustrated drawing 70.8137 kawasaki heater install kit for 4500p.

  • Page 81: Parts

    Parts illustrated parts - 81 use only original ventrac replacement parts. 70.8108 kawasaki heater install kit for 4500p ref. Part no. Description qty. 1 . . . . . . . . . 11.0052 . . . . . . . . . . . . . . . . . . . .Clamp, hose ss 13/16 x 1-1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . ....

  • Page 82: Warranty

    Warranty - 82 li mited warranty - ventrac turf equipment venture products, inc. (shall be referred to as v.P.I.) warrants on the terms and conditions herein, that it will repair, replace, or adjust any part manufactured by venture products inc. And found by venture products inc. To be defective in m...

  • Page 83: Warranty

    Warranty warranty - 83 li mited warranty - ventrac turf equipment equipment or other than as recommended in the operator’s manual or other operational instructions provided by v.P.I.; (h) repairs or replacements resulting from parts or accessories which have adversely affected the operation, perform...