Operator’s manual & parts drawings stump grinder model lc150 revised 09/16/15 09.10033 rev. 03 original operator’s manual.
2 500 venture drive po box 148 orrville, oh 44667 www.Ventrac.Com to the owner contact information and product identification if you need to contact an authorized ventrac dealer for information on servicing your product, always provide the product model and serial numbers. Please fill in the followi...
Table of contents 3 introduction page 4 product description ................................................................................................................................4 why do i need an operator’s manual? .............................................................................
Introduction - 4 introduction product description the ventrac lc150 stump grinder is designed for quick removal of unwanted stumps and roots. Heavy duty carbide cutters provide extended and effective performance in spite of dirt, stones, and debris in the work area. The stump grinder mounted on a 30...
Introduction introduction - 5 using your manual throughout this manual, you will encounter special messages and symbols that identify potential safety concerns to help you as well as others avoid personal injury or damage to the equipment. Attention this symbol identifies potential health and safety...
Safety - 6 safety safety decals the following safety decals must be maintained on your lc150 stump grinder. Keep all safety decals legible. Remove all grease, dirt, and debris from safety decals and instructional labels. If any decals are faded, illegible, or missing, contact your dealer promptly fo...
Safety safety - 7 decal description part number quantity a danger, shield missing 00.0062 1 b warning, keep hands & feet clear 00.0123 2 c warning, moving parts 00.0216 1 d warning, read owner’s manual 00.0217 1 e warning, pinch point 00.0218 2 f warning, do not reach 00.0219 1 g warning, general sa...
Safety safety - 8 general safety procedures for ventrac power units, attachments, & accessories training required • the owner of this machine is solely responsible for properly training the operators. • the owner/operator is solely responsible for the operation of this machine and prevention of acci...
Safety safety - 9 general safety procedures for ventrac power units, attachments, & accessories • if equipped with a high/low range feature, never shift between high and low range while on a slope. Always move the machine to level ground and engage the parking brake before shifting range. • do not l...
Safety safety - 10 general safety procedures for ventrac power units, attachments, & accessories operating on slopes • slopes can cause loss-of-control and tip-over accidents, which can result in severe injury or death. Be familiar with the emergency parking brake, along with the power unit controls...
Safety safety - 11 general safety procedures for ventrac power units, attachments, & accessories maintenance • keep all safety decals legible. Remove all grease dirt, and debris from safety decals and instructional labels. • if any decals are faded, illegible, or missing, contact your dealer promptl...
Safety safety - 12 general safety procedures for ventrac power units, attachments, & accessories • do not overfill fuel tank. Only fill to bottom of fuel neck, do not fill fuel neck full. Overfilling of fuel tank could result in engine flooding, fuel leakage from the tank, and/or damage to the emiss...
Safety safety - 13 lc150 safety procedures • during operation, set up the power unit and stump cutter so that particles are directed away from buildings or other objects of value. • during the grinding process, objects can be propelled from the stump grinder causing injury or damage to people, anima...
Operation - 14 general operation general operation daily inspection 1. Always set the parking brake, shut off power unit engine, remove the ignition key, and ensure all moving parts have come to a complete stop before inspecting components, or attempting any repair or adjustment. Park machine on a l...
General operation operation - 15 operating procedure warning during the grinding process, objects can be propelled from the stump grinder causing injury or damage to people, animals, buildings, vehicles, or other objects of value. Block access to the area prior to grinding stumps. Use plywood or equ...
Service - 16 service cleaning and general maintenance for best results, and to maintain the finish of the stump grinder, clean or wash the stump grinder after each use to remove wood shavings, dirt, and other debris. Belt inspection inspecting the drive belts of the stump grinder can prevent sudden ...
Service service - 17 lubrication locations lubrication is required at the following locations using a lithium complex nlgi #2 grease. Refer to the maintenance schedule for service intervals and amount of grease. Gearbox oil gearbox oil level should be maintained at approxi- mately half full when the...
Service service - 18 maintenance schedule maintenance schedule # of lo ca tio ns # of pu m ps da ily at 50 ho ur s at 10 0 ho ur s at 15 0 ho ur s at 20 0 ho ur s at 25 0 ho ur s at 30 0 ho ur s at 35 0 ho ur s at 40 0 ho ur s at 45 0 ho ur s at 50 0 ho ur s at 55 0 ho ur s at 60 0 ho ur s at 65 0 h...
Specifications - 19 specifications dimensions overall height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19-1/2 inches (49.5 cm) overall length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 inches (101.5 cm) overall width . . . . . . . . . . . . . . . . . . . ....
Illustrated parts - 20 use only original ventrac replacement parts. Illustrated drawing main frame, blade/stand frame, & hydraulics parts.
Parts illustrated parts - 21 use only original ventrac replacement parts. Ref. Part no. Description qty. 2 . . . . . . . . . 00.0215 . . . . . . . . . . . . . . . . . . . .Decal, height indicator lc150 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 3 . . . . ....
Parts illustrated parts - 22 use only original ventrac replacement parts. Illustrated drawing belt drive (power unit to gearbox).
Parts illustrated parts - 23 use only original ventrac replacement parts. Ref. Part no. Description qty. 1 . . . . . . . . . 29.0090 . . . . . . . . . . . . . . . . . . . .Pipe, breather plug 1/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 2 ....
Parts illustrated parts - 24 use only original ventrac replacement parts. Illustrated drawing belt drive (gearbox to cutter/rotor).
Parts illustrated parts - 25 use only original ventrac replacement parts. Ref. Part no. Description qty. 1 . . . . . . . . . 90.0610 . . . . . . . . . . . . . . . . . . . .Bolt, 3/8-16 uss x 1 1/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....
Parts illustrated parts - 26 use only original ventrac replacement parts. Illustrated drawing rotor shield, belt cover, & safety decals.
Parts illustrated parts - 27 use only original ventrac replacement parts. Ref. Part no. Description qty. 1 . . . . . . . . . 99.Sf0606 . . . . . . . . . . . . . . . . .3/8-16 x 3/4 flange bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 . . ....
Limited warranty - ventrac turf equipment warranty venture products, inc. (shall be referred to as v.P.I.) warrants on the terms and conditions herein, that it will repair, replace, or adjust any part manufactured by venture products inc. And found by venture products inc. To be defective in materia...
Warranty limited warranty - ventrac turf equipment or that has altered, modified or affected the turf equipment so as to change the intended use of the product; (g) repair or replacement necessitated by the use of parts, accessories or supplies, including gasoline, oil or lubricants, incom- patible ...