Summary of VC
Page 1
User's manual vkm/vkmz/vc centrifugal inline fans v05en-07.Indd 1 28.04.2016 16:22:21.
Page 2
Www.Ventilation-system.Com 2 contents safety requirements .................................................................................................................... 2 purpose ......................................................................................................................
Page 3
3 unit mounting and operation safety precautions • disconnect the unit from power mains prior to any installation operations. • unpack the unit with care. • do not lay the power cable of the unit in close proximity to heating equipment. • while installing the unit follow the safety regulations speci...
Page 4
Www.Ventilation-system.Com 4 purpose the vents vkm/vkmz/vc centrifugal fans in a metal casing are designed for ventilation of domestic, public and manufacturing premises heated during winter. The transported air temperature must be within the limits stated in the "technical data" section. The fan is...
Page 5
5 designation key e xhaust spigot diameter 100; 125; 150; 200; 250; 315; 355; 400; 450 mm options: q - equipped with a low-watt motor e - equipped with an energy-saving motor un - speed controller and temperature controller p - speed controller r - 0.4 m power cord with the c14 connector s - increas...
Page 6
Www.Ventilation-system.Com 6 technical data permitted deviation of mains voltage: ±10 % of the rated voltage. The fan must be grounded. Ingress protection rating ipx4. Fan model voltage, 50 hz [v] power [w] current [a] air capacity [m 3 /h], max rpm noise level at 3 m [db(a)] transported air tempera...
Page 7
7 fan model voltage, 50 hz [v] power [w] current [a] air capacity [m 3 /h], max rpm noise level at 3 m [db(a)] transported air temperature [°c] vc 100 q 1~230 60 0.37 210 2620 36 -25 +55 vc 100 1~230 73 0.32 270 2830 47 -25 +55 vc 125 q 1~230 60 0.37 255 2535 36 -25 +55 vc 125 1~230 75 0.33 355 2800...
Page 8
Www.Ventilation-system.Com 8 overall and connecting dimensions vkm 100 - 125 e vkm 100 - 315 vkm 355 - 450 fig. 1 fig. 2 fig. 3 model dimensions [mm] weight [kg] fig. No. D d1 b b1 l l1 l2 l3 vkm 100 e 100 204 - - 195 20 20 258 2.1 1 vkm 100 q 98 254 298 258 205 20 25 30 3.45 2 vkm 100 98 254 298 25...
Page 9
9 vkmz 100 - 315 model dimensions [mm] weight [kg] d d1 b b1 l l1 l2 l3 vkmz 100 q 98 237 253 293 202 23 22 30 3.16 vkmz 100 98 237 253 293 202 23 22 30 3.16 vkmz 125 q 123 237 253 293 202 23 22 30 3.16 vkmz 125 123 237 253 293 202 23 22 30 3.16 vkmz 150 148 278 294 334 200 25 23 30 3.42 vkmz 160 15...
Page 10
Www.Ventilation-system.Com 10 vc-vk vc-vn / vcz-vn vc-pn vc-pk model dimensions [mm] weight [kg] d d1 d h h1 l vc 100 q 98 249 6,1 310 295 115 3.1 vc 100 98 249 6,1 310 295 115 3.2 vc 125 q 123 249 6,1 310 295 115 3.1 vc 125 123 249 6,1 310 295 115 3.2 vc 150 149 300 6,1 400 385 115 4.8 vc 160 159 3...
Page 11
11 design and operating logic the vkm/vkmz fan (fig. 4-5) consists of the casing 1, the electric motor attached to the inner fixing bracket 4, the cover 2 that is fixed to the casing with screws 3 (the casing spigot diameter and the cover diameter are equal to the connected air duct diameter), the t...
Page 12
Www.Ventilation-system.Com 12 the vc-vn/vcz-vn fan (fig. 7) consists of the casing 1. The electric motor and the impeller 3 are mounted inside the casing using the fixing bracket 2. The casing is attached to the base plate with screws 5. The terminal box 4 is located on top of the casing on intake s...
Page 13
13 mounting the unit must be mounted by a qualified expert only, properly trained and having the required tools and materials. Vkm/vkmz fan the fans are designed for vertical or horizontal mounting. Air motion in the system must be in compliance with the direction of the arrow on the fan casing. Ins...
Page 14
Www.Ventilation-system.Com 14 connection to power mains disconnect the unit from power supply prior to any operations with the unit. Connection of the unit to power mains is allowed by a qualified electrician with a work permit for the electric units up to 1000 v after careful reading of the present...
Page 15
15 the tw1, tw2 terminals are the electrical leads of the normally closed contact of the motor overheating protection. Connect the contact in series to power circuit of the magnetic starter coil km1 that starts the motor after pressing the s1 button. In case of pressing the s2 button or motor overhe...
Page 16
Www.Ventilation-system.Com 16 technical maintenance disconnect the unit from power mains prior to any maintenance operations. Disconnect the fan from power supply prior to maintenance and servicing operations. The technical maintenance includes periodic cleaning of the surfaces from accumulated dust...
Page 17
17 manufacturer’s warranty the manufacturer hereby warrants normal operation of the unit for 24 months after the retail sale date provided the user's observance of the transportation, storage, mounting and operation regulations. Should any malfunctions occur in the course of the unit operation throu...
Page 18
Www.Ventilation-system.Com 18 acceptance certificate unit type centrifugal inline fan model vkm ______________ vkmz _____________ vc ________________ serial number manufacture date is compliant with the technical specifications and is hereby declared ready for service. We hereby declare that the pro...
Page 19
19 installation certificate installation company stamp the unit has been connected to power mains pursuant to the requirements stated in the present user's manual. Company name address phone number installation technician's full name installation date: signature: the unit has been installed in accor...
Page 20
V05en-07 v05en-07.Indd 20 28.04.2016 16:22:25.