Venturi mini User Manual - page 9
Page 9
LOCK
LOCK
LOCK
LOCK
Installation
The Venturi Mini is designed to be plugged into the vehicle cigarette
lighter socket or 12V charging point. The operation of this socket
may vary from vehicle to vehicle. In some vehicles power to the
socket is switched off when the ignition key is removed whilst in
others the power remains on at all times irrespective of the vehicle
ignition status.
To install the Vent
To install the Vent
To install the Vent
To install the Venturi Mini
uri Mini
uri Mini
uri Mini
1.
Plug the Venturi Mini into the
cigarette lighter socket so that
the ‘Phone’ and ‘Music’ icons
are at the top.
2.
Rotate the ‘locking ring’ (15)
clockwise to secure the device
in the cigarette lighter socket.
To remove the Venturi Mini
To remove the Venturi Mini
To remove the Venturi Mini
To remove the Venturi Mini
1.
Unscrew the locking ring (15) so that the Venturi Mini is loose
enough to be removed from the 12V socket.
2.
Remove the Venturi Mini from the cigarette lighter socket
NOTE:
NOTE:
NOTE:
NOTE: Do
Do
Do
Do n
n
n
not
ot
ot
ot pull the V
pull the V
pull the V
pull the Venturi Mini from the socket when
enturi Mini from the socket when
enturi Mini from the socket when
enturi Mini from the socket when locked
locked
locked
locked in place
in place
in place
in place
with the locking ring, doing s
with the locking ring, doing s
with the locking ring, doing s
with the locking ring, doing so may damage the
o may damage the
o may damage the
o may damage the socket.
socket.
socket.
socket.
To Turn
To Turn
To Turn
To Turn OFF the Venturi Mini
OFF the Venturi Mini
OFF the Venturi Mini
OFF the Venturi Mini
1.
Press and hold the Settings key (2) to turn off.
NOTE: Remove the Venturi Mini when leaving the vehicle to stand for
NOTE: Remove the Venturi Mini when leaving the vehicle to stand for
NOTE: Remove the Venturi Mini when leaving the vehicle to stand for
NOTE: Remove the Venturi Mini when leaving the vehicle to stand for a long
a long
a long
a long
period
period
period
period....