Dual scanner user manual www.Venuelightingeffects.Com.
Specifications lamp: elc 24v 250w motor(s): 4 precision micro-stepping motors 1.8/step gobos: 13 color: 10 solid colors, 10 bi-color combinations plus open modes of operation: stand-alone auto, sound active, master/slave, dmx dmx channels: 4 pan: 165° tilt: 114° cooling: fan input power: 120vac 60hz...
Operation dip switch settings: this product utilizes a dip switch address block to select the mode of operation, such as dmx mode, standalone-auto (master/slave), or sound active (master/slave). About dip switches: dip switch #1 through #9 the dmx receipt mode: address code the master/slave mode: 1 ...
How to select functions: dmx receipt mode: flip dip switch #11 to “off”, the fixture is now in dmx receipt mode. Dip switch #1 through #9 set the dmx address of the fixture. Auto mode: when using one fixture only, put dip switch #11 “on”. This places the unit into stand alone auto mode. Flip dip swi...
Sound active mode when using one fixture only, put dip switch #11 “on”: this places the unit into stand alone sound active mode and select dip switches 1-6 to the “on” position to activate built in programs. To adjust the speed of the program refer to the chart below and turn “on” corresponding dip ...
Channels and digital values channel 1 pan (x) channel 2 tilt(y) channel 3 gobo 0-5 black out 6-15 dimming 16-223 gobo rotation and gobo selection 224-239 gobo scroll in steps 240-255 strobe speed (shutter) 7 speeds channel 4 color 0-143 mixed colors 144-239 incremental color change 240-255 rainbow c...
Trouble shooting fixture does not turn on output power seems low fixture does not respond to dmx signal scanner loses position on one or more of its functions. The head does not respond to the music in sound or controller sound activated strobe. Fault check check power line connection and fuse. If t...
1. Read all safety and operating instructions before using this product. 2. All safety and operating instructions should be kept for future reference. 3. Read and understand all warnings listed on the operating instructions. 4. Follow all operating instructions to operate this product. 5. This produ...
