Veracity HIGHWIRE Powerstar Duo VHW-HWPS-C2 Quick Start Manual - page 2
PRODUCT
DIMENSIONS
| Connect 1-2 cameras or POE / non-POE
devices to the RJ45 ports.
| 57V DC power to the HIGHWIRE Powerstar
Base unit is recommended, giving typically 25
watts of total camera power budget.
APPLICATION DIAGRAM
POE OVER COAX
| Connecting 57V DC power directly to the
Duo unit increases the POE power available
if required.
| The VPSU-57V-800 supply supports 40
watts of total camera power and the VPSU
57V-1500 supports 78 watts.
APPLICATION DIAGRAM
LOCAL POWER SUPPLY
| Total camera power budget using a POE
switch is typically 8 watts (802.3af) or 18
watts (802.3at). Refer to the power budget
table in the datasheet.
Note
| The LED indicated power is the total
limit and remains constant.
| No POE is sent over the coax, so a
HIGHWIRE VHW-HW powered by 12V
may be used at the base side.
75 mm
22
m
m
POWER
SUPPLY
NETWORK
SWITCH
Ethernet Data Only
VHW-HW
VHW-HWPS-C2
12V DC
VPSU-12V-U
Ethernet & POE
VPSU-57V-800
or
VPSU-57V-1500
POWER
SUPPLY
Up to 350M on RG-59 500M on RG-11
Data Only, No POE over COAX
CAMER
A
CAMER
A
Ethernet & Optional POE
Up to 350M on RG-59 500M on RG-11
VHW-HWPS- B
VHW-HWPS-C2
CAMER
A
CAMER
A
Optional 57V DC Power
(recommended for
maximum power delivery)
VPSU-57V-800
Ethernet & POE
POE over COAX
POWER
SUPPLY
POE NETWORK
SWITCH
75 mm
113.2 mm
131.38 mm
86.1 mm