Verbatim InSight 320GB User Manual - For Windows Users:

up wizard to install the software.

Disconnecting Your Portable Hard Drive

Your Verbatim portable hard drive is hot-pluggable; it can be 

connected and disconnected without restarting your computer. To 

disconnect your Verbatim hard drive at any time, simply perform the 

following steps. You can also disconnect your hard drive at any time 

while your computer is powered off.

Note: Please be careful to follow the correct procedure when  

  disconnecting your unit. Your 

InSight display will update its disk  

  information during the disconnection procedure. Simply  

  unplugging the unit without first following the instructions below  

  will cause the display to show incorrect information and may  

  result in damage to your unit and/or loss of data.

For Windows Users:

  1. If you have files located on your drive open in any applications,  

    close them.

  2. Click the Unplug or Eject Hardware button in the System Tray.

  3. Select your drive from the menu that appears.

  4. After a moment, Windows will display a message that your  

    hardware can be safely removed.

For Mac OS Users:

  1. If you have files located on your drive open in any applications,  

    close them.

  2. Locate the icon for your drive on the desktop, and drag it to the  

    trash.

Note: Please wait for the display to refresh fully before   

  unplugging the drive. If you unplug the drive too soon you will

  not get an updated display.

5