Verex Monitor AFx User Manual - page 10
8 Zone Keypad
Operation
2 Zone Keypad
Operation
8
MONITOR ISM™/AFx™ Multi-Tenant Security System User Guide
22-9050 v1.3
2
3
5
6
8
9
0
1
2
3
4
5
6
7
8
S
T
f
4
7
1
X
!
Adding a New User continued
•
Now enter the new user’s PIN #
•
Enter the new user’s PIN # again to confirm it.
The new user should now be programmed. Test the PIN by turning the system ON and use the new
PIN to turn it off.
To Review:
Press F and 9 and Master PIN and userID
(#2-8) and Authority # Level and new user’s
PIN and new user’s PIN again to confirm.
To Review:
Press and
9 and Master PIN and userID
(#2-8) and Authority # Level and new user’s
PIN and new user’s PIN again to confirm.
Erasing an Existing User
•
Follow the same procedures as adding a new user but instead of ordinarily entering a new PIN #, enter
“0000” (4 zeros) twice, instead.
•
This will erase the old user and they will not be able to use the system with their old PIN #.
•
This will remove the user from the group of 8 users for the system and that user ID# will now be vacant
and available for a new user.
To Review:
Press F and 9 and Master PIN and userID
(#2-8) and Authority # Level and PIN# 0000 and
PIN# 0000 again to confirm.
To Review:
Press and
9 and Master PIN and userID (#2-8)
and Authority # Level and PIN# 0000 and PIN#
0000 again to confirm.
Test the old PIN to make sure it does not work anymore by turning the system ON and trying to use the
old PIN to turn the system off. It should not work. Turn the system off with your master PIN.
∗
A Master User can not change their Authority Level
∗