Veria control t45 installation guide installationsanleitung installasjonsveiledning installationsguide asennusopas installationsvejledning en de no se fi dk.
2 3 table of content introduction 3 button and display description 4 installing and wiring the thermostat 5 basic functionality - select how to control your floor heating system 6 - recommended settings 7 - setting the clock 8 - setting the maximum floor temperature 8 - reading the floor temperature...
4 5 button and display description current room temperature heating element warming day of the week thermostat on on/off down up clock mode current floor temperature installing and wiring the thermostat to mount the thermostat to the wall box/wall socket, first open the thermostat by gently pushing ...
6 7 basic functionality power on/off to turn thermostat on or off press “ ” select how to control your floor heating system your veria floor heating system can be controlled either by the: • floor temperature - program mode 2 the heating element turns on/off around a floor temperature setpoint (the ...
8 9 basic functionality setting the clock with the thermostat turned on. Press “ ” once, hour will be flash. Use the up/down key to select the hours. Press “ ” again, minute will be flash. Use the up/down key to select the minutes. Press “ ” button again, till the week day flashes. Use the up/down k...
10 11 activate timer mode when using the timer mode, you must first activate the timer mode: with the thermostat turned on, hold the “m” button for 3 seconds. You can select below settings: 00 = override (disable timer functionality) 01 = programmable. And the display will show “ ”. Leave the thermo...
12 13 how to progamme the timer: hold the “ ” for 3 seconds, the number 1 and “mo tu we th fr” are displayed. This indicates that you can program the first switching time for the week-day. Use up/down key to set the required start time. Press “ ” to accept this setting. Use the up/down key to set th...
14 15 technical specifications external sensor: ntc 10 kohm at 25° c sensor values: 15°c 18°c 20°c 22°c 14,8 kohm 13,1 kohm 12,1 kohm 11,2 kohm display: lcd power consumption: set-point range: room: 5°c to 35°c floor: 20°c to 35/45°c accuracy: ±1°c buttons: touch pad switch current rating: mains vol...
