VeriFone FlexClock Setup Manual

Also check for fi rewalls or routers blocking outgoing 

communications. If this is the case, please allow (or request 

your IT department to allow) the following outgoing address 

on your fi rewall: fl exclock.payrollservers.us port.  The 

FlexClock makes outbound TCP connections on port 8289, 

and does not need to accept any inbound connections.  

Please note that if you try to access this address with a web 

browser, no page will be displayed and you may receive an 

error message from your web browser.  This is normal.

DNS Error

This message can have multiple causes, but often results 

from mistakes when entering manual IP address parameters, 

or from problems with your Internet connection.  

Specifi cally, it means that the clock could not use your 

Internet connection to look up “fl exclock.payrollservers.us”.

Frozen Screen

Press the number seven (7) on the keyboard of the FlexClock 

or disconnect and reconnect the power to restart it. (This 

won’t erase any punch information.)

Already Sending

There is an ongoing connection between the server and 

the FlexClock, please allow it to fi nish. If this continues for 

a period longer than 10 minutes restart the FlexClock by 

pressing the seven (7) key on the keyboard.

Also check for fi rewalls or routers blocking outgoing 

communications. If this is the case, please allow (or request 

your IT department to allow) the following outgoing address 

on your fi rewall: fl exclock.payrollservers.us port.  The 

FlexClock makes outbound TCP connections on port 8289, 

and does not need to accept any inbound connections.  

Please note that if you try to access this address with a web 

browser, no page will be displayed and you may receive an 

error message from your web browser.  This is normal.

DNS Error

This message can have multiple causes, but often results 

from mistakes when entering manual IP address parameters, 

or from problems with your Internet connection.  

Specifi cally, it means that the clock could not use your 

Internet connection to look up “fl exclock.payrollservers.us”.

Frozen Screen

Press the number seven (7) on the keyboard of the FlexClock 

or disconnect and reconnect the power to restart it. (This 

won’t erase any punch information.)

Already Sending

There is an ongoing connection between the server and the 

FlexClock, please allow it to fi nish. If this message continues 

for a period longer than 10 minutes restart the FlexClock by 

pressing the seven (7) key on the keyboard.

FlexClock 

Multi-Purpose Time Device

FlexClock 

Multi-Purpose Time Device

Setup Guide

Setup Guide