Verilux CleanWave Instruction Manual

Manual is about: UV-C Sanitizing Furniture & Bed Vac

Summary of CleanWave

  • Page 1

    Vh07.

  • Page 2

    2 dear customer, thank you for purchasing the verilux cleanwave ® uv-c sanitizing furniture & bed vac. You have received an innovative and quality manufactured product, backed by a one-year limited warranty. Many other healthy lighting products are available through our catalog and online. Visit us ...

  • Page 3: Table of Contents

    3 table of contents important safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 fcc compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 introduction . . . . . . . . . . . . . . . . . . ...

  • Page 4

    4 important safety instructions read all instructions before using your cleanwave ® uv-c sanitizing furniture & bed vac when using an electrical appliance, the following basic safety precautions should always be observed. Warning: to reduce the risk of fi re, electric shock or injury: • do not leave...

  • Page 5: Fcc Compliance

    5 important safety instructions continued fcc compliance the uv-c bulb from activating when the product is removed from the cleaning surface. The uv-c bulb will re-activate when placed back on a cleaning surface. • for your safety, do not attempt to manually over-ride the safety switch. • do not poi...

  • Page 6: Introduction

    6 introduction what’s included your new verilux ® cleanwave ® uv-c sanitizing furniture & bed vac is both a convenient and powerful hand-held vacuum and an easy-to-use bed vacuum. The hand-held design makes it a fast and effective anytime, anywhere vacuum. As a bed vacuum, the combination of powerfu...

  • Page 7: Cleanwave

    7 your new verilux ® cleanwave uv-c sanitizing furniture & bed vac features: • a powerful ultraviolet (uv-c) illumination system that eliminates up to 99.9% of viruses (including the h1n1 “swine fl u” virus), bacteria, fungus and mold spores. • vacuum cleaner removes dead skin cells, fl eas and fl e...

  • Page 8: Initial Set-Up

    8 initial set-up vacuuming with uv-c 1. Attach the vacuum cleaner to the base unit. Insert it into the base unit and then press the rear down fi rmly. Press lever down when docking vacuum. Then pull up until lever clicks to lock. (see figure 1) 2. Turn on the cleaner using the on/off switch. The uv-...

  • Page 9

    9 mattress / bedding cleaning guidelines in order for the uv-c light to be fully effective against bacteria and other pathogens, the area to be cleaned must be exposed for a suffi cient time. We suggest the following guidelines: • start in one corner of the bed. • keep the vacuum fl at against the m...

  • Page 10: Cleaning The Inlet

    10 cleaning the inlet if the inlet is blocked by dust, completely remove the foreign materials – after fi rst turning the vacuum off. A blocked inlet may result in weakened suction and noise. If the inlet is blocked, there is also a risk of damage or malfunction caused by overheating. Care and maint...

  • Page 11: Avoiding Exposure to Dust

    11 care and maintenance continued avoiding exposure to dust when emptying any vacuum cleaner, it is diffi cult to avoid exposure to dust. If you are an allergy sufferer or sensitive to dust, you can minimize this risk. 1. Place the dust container in a large bag, and close the bag as tightly as possi...

  • Page 12: Replacing The Uv-C Bulb

    12 replacing the uv-c bulb before replacing the bulb, make sure the vacuum cleaner is switched off and unplugged from the power outlet. The life span of the uv-c bulb, under normal use, is 2 to 3 years. Caution: use only verilux ® bulbs. Use of an incorrect bulb can result in damage. To order a repl...

  • Page 13: Troubleshooting

    13 troubleshooting poor suction the fi lter may be blocked. • remove and clean the fi lter. The dust container may be full. • empty dust container. Uv-c light is not illuminated vacuum cleaner may not be fi tted to base unit correctly. • ensure the cleaner is securely locked into position. Safety sw...

  • Page 14: Technical Specifi Cations

    14 technical specifi cations environment operating temperature: 10°c (50°f) to 40°c (104°f) storage temperature: 0°c (32°f) to 60°c (140°f) relative humidity: 10% to 90% non-condensing uv-c bulb 8 watt uv-c bulb (replace with verilux model number vh07rb1 only) uv-c peak wavelength 254 nanometers pow...

  • Page 15

    Vh07-man-rev8 please visit our web site at: www.Verilux.Com 340 mad river park, waitsfi eld, vt 05673 printed in china for verilux, inc. © copyright 2009 verilux, inc. All rights reserved..