Summary of EasyFlex Deluxe VF02
Page 1
Vf02.
Page 2
2 dear customer, thank you for purchasing the verilux easyflex ® deluxe natural spectrum ® floor lamp. You have received a quality product, backed by a one year limited warranty. As a verilux customer, your satisfaction means everything to us. We look forward to serving you now and in the future. Ma...
Page 3: Save These Instructions
3 save these instructions thank you for purchasing the original natural spectrum ® floor lamp. Please read the following safety information before using. To reduce the risk of fire, electrical shock or injury to persons: • do not dismantle. • do not alter power cord. • turn off/unplug and allow to c...
Page 4
4 avertissements et précautions • pour usage intérieur seulement. • la lampe est un dispositif électrique. Ne pas utiliser prÈs de l’eau. • avant de brancher la lampe, vérifier que la tension de la prise murale ne dépasse pas 120 volts. • ne pas utiliser avec des gradateurs de lumière, des minuterie...
Page 5: Getting Started
5 getting started main parts & controls a. Ergonomic handle b. Lamp head c. High/off/low switch d. Gooseneck e. Shaft f. Ergonomic height adjustment lever g. Lamp base h. Power cord i. Ballast j. Led indicator k. Bulb l. Parabolic light diffuser a b c d e f h g i close-up of lamp head close-up of ba...
Page 6
6 getting started — continued please read instructions carefully before using the easyflex ® . 1. Unpack lamp carefully, removing all packaging material, and confirm you have all parts shown in the diagram. For your convenience, the bulb has been inserted into the socket. 2. Remove all pieces from b...
Page 7: Assembly Instructions
7 assembly instructions 1. Set the lamp base on the floor and insert the lamp shaft over the base support unit until the screw holes line up as shown in fig. 1. Insert the screw using the tightening tool and turn clockwise to tighten. 2. Hold the upper shaft with one hand and release the ergonomic h...
Page 8: Note: Be Sure All
8 assembly instructions — continued 3. Attach the lamp head gooseneck to the shaft until the screw holes line up as shown in fig. 3. Use care when tucking the wire into the shaft. Form a loop with any excess wire prior to tucking it. Insert the screw using the tightening tool and turn clockwise to t...
Page 9: Attention!
9 assembly instructions — continued 5. Attach the ballast to the power cord. Use care to align the 4-pin plug properly. Do not force. The power cord is designed to connect only one way (fig. 5). 6. Plug the ballast into a standard 120v 50/60hz outlet and turn the lamp on. The green led indicator (j)...
Page 10: Bulb Replacement
10 bulb replacement fig. 7 correctly seated bulb incorrectly seated bulb no gap notice large gap fig. 8 b d c a fig. 9 removal 1. Unplug the lamp from the power source. 2. To access the bulb, remove light diffuser by depressing the tab and lifting it out (fig. 7). 3. Firmly hold the bulb base (b) an...
Page 11: Troubleshooting
11 troubleshooting before requesting service on your verilux ® lamp, please read the following: • make sure all power connectors, cords and plugs are inserted fully and securely. • be sure the bulb is securely seated into the socket (see page 9). • make sure there is power to the wall outlet or try ...
Page 12
12 troubleshooting – continued be sure the bulb is securely seated into the socket, repeat the bulb installation process. Caution: disconnect lamp from outlet prior to repeating the bulb installation process. Mise en garde : dÉbrancher la lampe de la prise de courant avant de poser une nouvelle ampo...
Page 13: Care & Cleaning
13 care & cleaning your lamp is made from high quality materials that will last for many years with minimum care. You may want to periodically clean the lamp, using a mild non-abrasive cleaner and soft cloth. When cleaning, make sure you have turned off and unplugged the unit, and allowed sufficient...
Page 14: 1-800-786-6850
Please visit our website at www.Verilux.Com or call our customer service department at 1-800-786-6850 representatives are available monday — friday, 9am — 5pm est 340 mad river park, waitsfield, vt 05673 one year limited warranty attention! Once opened, please do not return this product to the store...
Page 16
Vf02-man-rev5 printed in china for verilux, inc. © copyright 2011 verilux, inc. All rights reserved..