Summary of Heritage Deluxe VF03
Page 1
Vf03.
Page 2
Dear customer, thank you for purchasing the verilux ® heritage™ deluxe full spectrum floor lamp. You have received a quality product, backed by a three-year limited warranty. As a verilux ® customer, your satisfaction means everything to us. We look forward to serving you now and in the future. Many...
Page 3: General Precautions
3 save these instructions thank you for purchasing the heritage™ natural spectrum ® deluxe floor lamp. Please read the following safety information before using. To reduce the risk of fi re, electrical shock, or injury to persons: • do not dismantle. • do not alter power cord. • turn off/unplug and ...
Page 4: Getting Started
4 getting started main parts & controls a. Optix ® glare control filter b. Switch c. Lamp head swivel knob d. Lamp arm e. Height adjusting collar f. Upper shaft g. Lower shaft h. Lamp base i. Power cord j. Power supply (ballast) k. Bulb a c d e f g h i j b k close-up of lamp head b a attention! Lift...
Page 5: Full Spectrum Floor Lamp:
5 please read operating instructions carefully before using the heritage™ full spectrum floor lamp: 1. Set lamp base on the fl oor and insert the lower lamp shaft (g) onto the base and screw clockwise to tighten. (fig.1) 2. Pull the slack of the electrical cord through the lamp base. (i) 3. Loosen t...
Page 6: Assembly Instructions Cont.
6 assembly instructions cont. 8. Attach the ballast to the power cord. Use care to align the 4-pin plug properly. Do not force – the 4-pin plug was designed to fi t in only one orientation. (fig. 3) fig. 3 9. Plug ballast into a standard 120v 50/60hz outlet. Turn lamp on. The green led indicator on ...
Page 7: The Heritage™ Floor Lamp
7 adjusting the heritage™ floor lamp 3. To adjust lamp head angle up or down – loosen swivel knob counterclockwise, place head at desired angle, tighten swivel knob to secure. (fig. 6) 4. To tilt lamp head toward you or away from you – simply move head to desired position. (fig. 8) fig.5 fig. 7 fig....
Page 8: Removal
8 bulb replacement instructions removal 1. Unplug lamp from power source. 2. To access the bulb, remove optix ® glare control fi lter by depressing the thumb tab and lifting it out. 3. Firmly hold bulb base (b) and pull bulb (c) from the socket (a) in an outward motion. (fig. 9) installation 1. Unpl...
Page 9: Troubleshooting
9 troubleshooting your verilux ® desk lamp uses advanced micro-electronics to power the revolutionary trucolite™ bulb. These electronics are housed in a specially designed ballast located at the power plug. The led indicator light on the ballast allows you to troubleshoot any problems with the lamp’...
Page 10: Care & Cleaning
10 care & cleaning your lamp is made from high quality materials that will last for many years with minimum care. You may want to periodically clean the lamp, using a mild non-abrasive cleaner and soft cloth. When cleaning, make sure you have turned off and unplugged the unit, and allowed suffi cien...
Page 11: Warranty
11 warranty three-year limited warranty attention! Once opened, please do not return this product to the store where it was purchased for repair or replacement! Many questions may be answered by visiting www.Verilux.Com, or you may call our customer service department at 1-888-544-4865. This limited...
Page 12: 1-888-544-4865
Vf03-man-rev3 please visit our web site at: www.Verilux.Com 340 mad river park, waitsfi eld, vt 05673 1-888-544-4865 printed in taiwan for verilux, inc. © copyright 2007 verilux, inc. All rights reserved..