Vd03-man-rev6 printed in china for verilux, inc. © copyright 2010 verilux, inc. All rights reserved..
Vd03.
2 dear customer, thank you for purchasing the verilux heritage™ deluxe natural spectrum ® desk lamp. You have received a quality product, backed by a one-year limited warranty. As a verilux customer, your satisfaction means everything to us. We look forward to serving you now and in the future. Many...
3 save these instructions thank you for purchasing the heritage™ deluxe natural spectrum ® desk lamp. Please read the following safety information before using. To reduce the risk of fire, electrical shock or injury to persons: • do not dismantle. • do not alter power cord. • turn off/unplug and all...
4 getting started caution: do not lift the lamp by the lamp arm. The lamp should be lifted by the vertical shaft. Main parts & controls a. Lamp head b. Switch c. Lamp head swivel knob d. Lamp arm e. Center swivel knob f. Counter weight arm g. Vertical shaft h. Lamp base i. Power cord j. Power supply...
5 assembly instructions please read operating instructions carefully before using the heritage™ desk lamp: 1. Set lamp base on the desk and insert the counter weight arm (f) onto the center swivel (e) and screw clockwise to tighten. (fig.1) 2. To lift lamp head, loosen swivel knob (c), adjust head t...
6 assembly instructions — continued vents 4. Attach the ballast to the power cord. Use care to align the 4-pin plug properly. Do not force. The 4-pin plug was designed to fit in only one orientation (fig. 3). Attention! Lift your lamp by the vertical shaft. Fig. 3 5. Plug ballast into a standard 120...
7 adjusting the heritage ™ floor lamp the heritage desk lamp adjusts several ways: 1. To adjust lamp height, hold lamp arm with one hand and loosen center swivel knob (e). Raise or lower lamp arm (d) to desired height. Tighten knob (fig. 5). 2. To adjust lamp head angle up or down, loosen swivel kno...
8 bulb replacement instructions removal 1. Unplug lamp from power source. 2. To access the bulb, remove optix ® glare control filter by depressing the thumb tab and lifting it out. 3. Firmly hold bulb base (b) and pull bulb (c) from the socket (a) in an outward motion (fig. 8). Installation 1. Unplu...
9 troubleshooting before requesting service on your verilux ® lamp, please read the following: • make sure all power connectors, cords and plugs are inserted fully and securely. • be sure the bulb is securely seated into the socket (see page 8). • make sure there is power to the wall outlet or try a...
10 care and cleaning your lamp is made from high quality materials that will last for many years with minimum care. You may want to periodically clean the lamp using a mild non-abrasive cleaner and soft cloth. When cleaning, make sure you have turned off and unplugged the unit and allowed sufficient...
11 please visit our website at www.Verilux.Com or call our customer service department at 1-800-786-6850 representatives are available monday — friday, 9am — 5pm est 340 mad river park, waitsfield, vt 05673 one year limited warranty attention! Once opened, please do not return this product to the st...
