Verilux Planet Light PL03 User Manual - Troubleshooting

Page of 11

Download

Print this page

Bookmark us

Troubleshooting

Before requesting service on your Verilux

lamp, please read the

following:

• Make sure all power connectors, cords and plugs are inserted fully

and securely.

• Be sure the bulb is securely seated into the socket (see page 7).

• Make sure there is power to the wall outlet or try another outlet.

•

CAUTION: DISCONNECT LAMP BEFORE PERFORMING

ALIGNMENT ACTIVITY.

MISE EN GARDE : DÉBRANCHER LA

LAMPE AVANT D’EFFECTUER SON ALIGNEMENT. Correct alignment

with screw holes can be accomplished by following these steps:

1. Always start with the base and work your way up the shaft and

attach the head last.

2. Place your foot on the base of the lamp on the floor.

3. While holding the shaft with your hand, gently rock the unit back

and forth.

4. Shaft should ease into socket and screw holes will align.

Be sure the bulb is securely seated into the socket, repeat the bulb

installation process.

CAUTION: DISCONNECT LAMP FROM OUTLET

PRIOR TO REPEATING THE BULB INSTALLATION PROCESS.

MISE EN

GARDE : DÉBRANCHER LA LAMPE DE LA PRISE DE COURANT AVANT

DE POSER UNE NOUVELLE AMPOULE.

« ‹ Prev 5 6 7 8 9 10 11 Next › »

Summary of Planet Light PL03

Page 1
Pl03 planet light ® energy saving natural spectrum ® desk lamp.
Page 2
2 dear customer, thank you for purchasing the planet light ® energy saving natural spectrum ® desk lamp. You have received a quality product, backed by a one-year limited warranty. As a verilux customer, your satisfaction means everything to us. We look forward to serving you now and in the future. ...
Page 3: Header
3 header save these instructions thank you for purchasing the planet light ® energy saving natural spectrum ® desk lamp. Please read the following safety information before using. To reduce the risk of fire, electrical shock, or injury to persons: • do not dismantle. • do not alter power cord. • tur...
Page 4
4 avertissements et précautions • pour usage intérieur seulement. • la lampe est un dispositif électrique. Ne pas utiliser prÈs de l’eau. • avant de brancher la lampe, vérifier que la tension de la prise murale ne dépasse pas 120 volts. • ne pas utiliser avec des gradateurs de lumière, des minuterie...
Page 5: Header
5 header getting started main parts & controls a. Lamp head b. Gooseneck c. Lamp base d. Power cord e. Polarized plug f. Bulb g. On/off switch a c e d b close-up of lamp head f g a.
Page 6: Set-Up Instructions
6 set-up instructions to prevent damage during shipping, the verilux ® bulb is surrounded by protective padding. Carefully remove and dispose of the protective padding. Check to ensure that the bulb is fully seated and has not come loose from the socket during shipping. There should be no gap betwee...
Page 7: Installation
7 bulb replacement instructions correctly seated bulb incorrectly seated bulb c b a c b a no gap notice large gap d installation 1. Unplug the lamp from power source. 2. Firmly hold the base (b) and push bulb (c) into the socket (a). 3. Be sure the bulb is firmly seated in the socket (see below) and...
Page 8: Troubleshooting
8 troubleshooting before requesting service on your verilux ® lamp, please read the following: • make sure all power connectors, cords and plugs are inserted fully and securely. • be sure the bulb is securely seated into the socket (see page 7). • make sure there is power to the wall outlet or try a...
Page 9: Care & Cleaning
Care & cleaning your lamp is made from high quality materials that will last for many years with minimum care. You may want to periodically clean the lamp, using a mild non-abrasive cleaner and soft cloth. When cleaning, make sure you have turned off and unplugged the unit, and allowed sufficient ti...
Page 10: One Year Limited Warranty
11 one year limited warranty attention! Once opened, please do not return this product to the store where it was purchased for repair or replacement! Many questions may be answered by visiting www.Verilux.Com, or you may call our customer service department at 800-786-6850 during normal business hou...