Verint S1801e Quick Installation Manual - page 5

5

To connect the audio cable:

1. Plug the audio cable from the audio source to the 

audio input connectors on the rear of the device.

Obtaining the IP Address of 

the Nextiva S1800e Series 

Device

By default, all Nextiva S1800e series devices are 

DHCP (Dynamic Host Configuration Protocol) 

enabled. Use SConfigurator to obtain the IP address 

of the device. If you have a DHCP server, the device 

will automatically obtain a valid IP configuration. 

Otherwise, you need to manually enter a IP address.

To obtain the IP address of the device:

1. Download the latest version of SConfigurator from: 

www.verint.com/manuals

.

2. Extract the executable file 

(

SConfigurator.exe

) to the desktop of the 

computer.

3. Start SConfigurator by double-clicking 

SConfigurator.exe

 on the desktop.

4. In the General tab, click Program Options.

5. Check Detect All Units on LAN.

6. Ensure that the VSIP Port is 5510; otherwise, click 

Default.

7. Ensure that the Discovery IP Address is 

255.255.255.255; otherwise, click Reset to 

Broadcast.

8. Click OK.

9. Select the Units tab, then click Discover. The 

information displayed for the Nextiva S1800e 

series device will vary depending on whether your 

network is using a DHCP server or not.

In a DHCP environment, the Unit Name column 

in the Units box displays the model name and a 

unique alpha-numeric value that corresponds 

to the MAC address of the device.

In APIPA mode, the Unit Name column in the 

Units box displays Unknown and the first two 

octets of the IP address in the Address column 

is 169.254. Use the following procedure to set 

the IP address for the device.

S1801e or S1801e-POE or 

S1801e-R or S1801e-R-HD 

S1802e