Tm power monitoring installation guide h81xx specifications inputs: h8150 90 to 132vac line-to-neutral h8163, h8167 90 to 300vac line-to-neutral frequency 50/60 hz accuracy: system accuracy ±1% of reading from 2% to 100% of the ct current rating * sample rate 1280 hz outputs: all models lcd 1.2” x 3...
Tm h81xx installation guide product identification 120 vac - 240 vac (nom.) amps one ct two cts three cts voltage output 100 micro h8150-0100-0-1 h8150-0100-0-2 h8150-0100-0-3 90-132vac l-n display only 200 mini h8150-0200-1-1 h8150-0200-1-2 h8150-0200-1-3 300 small h8150-0300-2-1 h8150-0300-2-2 h81...
Tm h81xx installation guide 3" (77 mm) 7.6" (193 mm) 8.3" (211mm) 14.8" (375 mm) a b e f c d a b e c f d b e f c d a a = 2.6" (66 mm) b = 1.1" (28 mm) c = 0.8" (19 mm) d = 1" (27 mm) e = 2.9" (74 mm) f = 3.5" (90 mm) a = 4.9" (124 mm) b = 2.9" (73 mm) c = 2.5" (62 mm) d = 1.1" (29 mm) e = 5.6" (141 ...
Tm h81xx installation guide product diagram ul ® c us n a + a d + b d + c d b c n a b c + - + - + - comm board slot * * comm board is optional and sold as a separate product. Display plain full black black yellow yellow red red power supply board slot h81xx series cover h8163/h8167 inside and board ...
Tm h81xx installation guide disconnect and lock out all power sources during installation and configuration. If making connections to the meter through more than one metallic conduit, use a bonding plate (veris part number ah11 or equivalent) to prevent electric shock. 1. Verify that the serial numb...
Tm h81xx installation guide typical 120 vac, 2-wire, 1Ø installation n a + a – + b – + c – b c n a b c red black yello w red black w hit e yello w red ct white Ø a n * * external fuse provided by installer (optional, per nec and local regulations). For 1600a or larger models in contact with a power ...
Tm h81xx installation guide information reporting the h81xx continually reports kwh or mwh, depending on the total accumulated energy. A secondary display cycles through other parameters. The meter has two modes of display operation, depending on the setting of the display data jumper (j8) on the ma...
Tm h81xx installation guide troubleshooting problem solution no display · check external fuses. · verify that the display cable has not been disconnected during installation. · verify voltage leads are properly connected. Reported power too low · verify cts and terminals are color-matched. · check f...