1. DL manuals
  2. VoiceSolo
  3. Monitor
  4. VSM-200P
  5. User Manual

VoiceSolo VSM-200P User Manual - Mic Stand Mounting

Manual is about: Passive Voice Monitor

Summary of VSM-200P

  • Page 1

    User’s manual vsm-200p passive voice monitor.

  • Page 3

    A important safety instructions the lightning flash with an arrowhead symbol within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to p...

  • Page 4: Welcome

    Welcome welcome to voicesolo the tc-helicon voicesolo vsm range of near field live monitoring speakers is a new concept in personal monitoring. Tc-helicon strives for excellence in all things related to vocals, and the vsm range builds upon the success and worldwide reputation of tc-helicon's vocal ...

  • Page 5: Table of Contents

    3 table of contents voicesolo vsm-200p rev 1.00 english version prod. No: 606119021 welcome . . . . . . . . . . . . . . . . . . . . .2 table of contents . . . . . . . . . . . . . . .3 introduction . . . . . . . . . . . . . . . . . . .4 front panel . . . . . . . . . . . . . . . . . . . .5 back panel ...

  • Page 6: Introduction

    4 introduction preliminary recommendations the voicesolo vsm series of monitors are capable of very high sound pressure levels (spls) especially at the close range when integrated onto a microphone stand. They were designed this way to be able to be loud enough to compete with live acoustic drum kit...

  • Page 7: Front Panel Control

    5 1. Volume level control this detented attenuator allows you to adjust your monitor level while staying close to your mic. This control functions differently than the volume control on an amplifier. As you turn up the volume on an amplifier, the amp works successively harder to produce more volume....

  • Page 8: Back Panel

    6 back panel 1. Speakon ® combo input jacks these jacks allow either a 1/4” speaker cable or speakon equipped speaker cable to connect to voicesolo. These jacks are paralleled and can be used to chain several vsm-200p units together. Thus, both jacks are designated as in/thru. A note about chaining ...

  • Page 9: Mic Stand Mounting

    7 voicesolo placement options voicesolo can be placed in 4 different ways. This versatility allows you to use it as a mic stand mounted monitor one night, a pa system on another and then use it at home for practice or jamming. Mic stand mounting mic stand integration what you need: • voicesolo • tri...

  • Page 10: Mic Stand Mounting

    8 mic stand mounting 3. Place voicesolo on the mic stand so the stand goes into the hole on the bottom of the voicesolo. If you don’t need to mount voicesolo on a boom stand, you are finished with your setup. If you require the boom, continue to the next step. 4. Mic boom mount the mic boom mount is...

  • Page 11: Mic Stand Mounting

    9 mic stand mounting 7. Your voicesolo should now look like this. Adjusting the boom to optimize line-of-sight and audibility it is usually better to have the monitor situated somewhat beside the singer. To do this it is necessary to adjust the position of the boom. The steps required to adjust the ...

  • Page 12: Using Voicesolo

    Reduced sensitivity at the back-sides of the mic, there is more sensitivity directly at the back of the mic. • when using handheld mics near voicesolo never point the mic at the speaker. This seems obvious yet it happens all the time. • when voicesolo is fed by an amplified monitor send, ensure that...

  • Page 13: Specifications

    11 specifications connectors 2 paralleled speakon ® combo jacks that accept speakon or 1/4” connectors speaker speaker: 6.5 inch ict custom-designed point source driver including inductively coupled tweeter nominal impedance: 8 ohms 120 watt program / 240 watt peak power handling sensitivity (i watt...