Void Bias VQ User Manual - page 14
Audio
Gain
32 dB, 30 dB, 28 dB, 26 dB,
24 dB, 22 dB, 20 dB, 18 dB,
14 dB, 4 dB, -∞, user selectable
Input sensitivity @ 8 Ω
1.94 V / +8 dBu
Max input level
6 V / +17.8 dBu
Frequency Response ( ±0.5 dB , 1 W @ 8 Ω)
20 Hz - 20 kHz
Crosstalk (1 kHz)
> 70 dB
S/N ratio (20 Hz - 20 kHz A-Weighted @ 8 Ω)
> 110 dB
Input impedance
10 kΩ balanced
THD+N (from 0.1 W to Full Power)
(typical
DIM (from 0.1 W to Full Power)
(typical
Slew Rate (input filter bypassed @ 8 Ω)
> 40 V/µs
Damping Factor @ 8 Ω, 20 Hz - 100 Hz
> 5000
AC Mains Power
Power supply
Universal regulated switch more with PFC
Nominal voltage (±10%)
100-240 V @ 50-60Hz
Power factor (> 500 W ouput)
> 0.95
Consumption/current draw
@ 115 V
@ 230 V
Idle
64 W
0.6 A
64 W
0.51 A
1/8 Max Output Power @ 4 Ω
605 W
11.6 A
605 W
5.8 A
1/4 Max Output Power @ 4 Ω
1772 W
22.2 A
1772 W
11.1 A
AC Mains connector
IEC C14 inlet;
region-specific power cord provided
Thermal
Operating temperature
0° - 45° C / 32° - 113° F
Cooling
Fan, continuously variable speed,
temperature controlled, front to rear airflow
Thermal dissipation
Idle
218 BTU/h
55 kcal/h
1/8 Max Output Power @ 4 Ω
955 BTU/h
241 kcal/h
1/4 Max Output Power @ 4 Ω
1781 BTU/h
449 kcal/h
DSP*
Architecture
Analog Devices SigmaDSP® 50 MIPS
AD/DA converters
Cirrus Logic® 24 bit 48 kHz
Internal precision
28 bit data path with 56 bit internal processing
Latency
1.0 ms fixed latency architecture
Memory/Presets
Up to 4 local presets, unlimited via Armonía Pro
Audio Suite™ software
Delay
340 ms input delay
10 ms per channel output delay
Equalizer
Parametric IIR: peaking, hi/lo-shelving, all-pass,
band-pass, band-stop, hi/lo-pass
Crossover
Butterworth, Linkwitz-Riley, Bessel:
6 dB/oct to 48 dB/oct (IIR)
Limiters
Peak limiter, RMS limiter,
frequency dependent RMS limiter
Remote control
Armonía Pro Audio Suite™ software
Networking*
Standards compliance
1x RJ45 auto-sensing 10/100 Mbps UTP port
Supported topologies
star, daisy-chain, closed loop
Remote interface
Armonía Pro Audio Suite™
Auxiliary supply
12 V / 1 A max for DSP management and remote on/
off via 2 pin Phoenix
2
MCV 1,5/ 2-G-3,81
Construction
Dimensions L x H x W
483 mm x 44.5 mm x 379 mm (19.0 in x 1.8 in x 14.9 in)
Weight
7.4 kg (16 lb)
Output Stage
Maximum output power per channel @ 8 Ω
750 W
Maximum output power per channel @ 4 Ω
1250 W
Maximum output power @ 8 Ω Bridged
2500 W
Max output power per ch. @ Hi-Z distributed line 70V**
1000 W
Max output power per ch. @ Hi-Z distributed line 100V**
1250 W
Maximum unclipped output voltage
135 V
peak
Maximum output current
65 A
peak
The power figure is calculated by driving and loading symmetrically all the
channels: uneven loads allow to achieve highest performance.
Bias VQ HDSP+ETH
Channel Handling
Number of channels
4 in / 4 out mono,
bridgeable per ch. pair
Analog input connectors
4x XLR
Speaker connectors
4x NL4MD speakON
* Only for HDSP+ETH model.
**
DSP preset or external high-pass and voltage limiter required.
Bias VQ User Guide V1.0
Page 12