At-530 user manual 1/50 at-530 user manual 1 at-530 features ........................................................................................................ 3 1.1 appearance ........................................................................................................................
At-530 user manual 2/50 2.9.4 time set: .................................................................................................29 2.9.5 reboot: ...................................................................................................29 3 use keypad configure at-530 ip phone ........
At-530 user manual 3/50 1 at-530 features 1.1 appearance 1.2 interface power: output power:12vdc,500ma. Wan: rj45 port. Lan: rj45 port. 1.3 electricity characteristic z speciality of electric: output the 12v 500ma dc z the network connects: 2 rj45 connect, a wan, a lan 1.4 software z support two sip...
At-530 user manual 4/50 z g.168 compliant 32ms echo cancellation z tone generation and local dtmf re-generation according with itu-t z e.164 dial plan and customized dial rules z hotline. Z speed dial z call forward, call transfer, 3-way conference calls z record z caller id display z dnd(do not dis...
At-530 user manual 5/50 1.9 installation use ethernet cable to connect at-530’s lan port and your computer. Set your computer’s ip to the network 192.168.10.X or using dynamic obtain ip. Open your web browser and key in 192.168.10.1. Then you will see the logon page of at-530, the default username a...
At-530 user manual 6/50 2 web configuration 2.1 access web setting page enter at-530 ip address in the web browser and press enter to go to the log on page, and key in the username and password to access at-530 setting page. Default username and password is: administrator: username: admin password: ...
At-530 user manual 7/50 2.2 current state this page shows at-530’s running state. Network shows the wan and lan port connecting state and current settings. Voip part show the working state of voip, you can see whether at-530 has registered the public sip server phone number public sip and private si...
At-530 user manual 8/50 2.3 network 2.3.1 wan config wan port network setting page. Support static ip, dynamic obtain ip and pppoe. ¾ configure static ip: ----enable static ; ----set at-530’s ip address in the ip address ; ----set netmask in the netmask field; ----set router ip address in the gatewa...
At-530 user manual 9/50 ----enter pppoe username and pin in the username and password . At-530 will automatically obtain wan port network information from your itsp if pppoe setting and the setup are correct. Notice: if user accesses the ip phone through wan port. He/she should use the new ip addres...
At-530 user manual 10/50 2.3.2 lan config bridge mode: enable this option to switch to bridge mode. Ip phone won’t assign ip for its lan port in bridge mode and its lan and wan port will be in the same network. (this setting won’t take effect unless you save the config and reboot the device) ip netm...
At-530 user manual 11/50 2.4 voip 2.4.1 sip config setting page of public sip server: register server addr: register address of public sip server register server port: register port of public sip server ， default port is 5060 register username: username of your sip account (always the same as the ph...
At-530 user manual 12/50 encrypt, default is common dtmf mode: dtmf signal sending mode: support rfc2833, dtmf_relay (inband audio) and sip info rfc protocol edition: current at-530 sip version. Set to rfc 2543 if the gate need to communicate to devices (such as cisco5300) using the sip 1.0. Default...
At-530 user manual 13/50 default enable g.729: using g.729 speech coding mandatory consultations 2.5 advance 2.5.1 dhcp server dhcp server manage page. User may trace and modify dhcp server information in this page. Dns relay: enable dns relay function. User may use below setting to add a new lease ...
At-530 user manual 14/50 2.5.2 nat advance nat setting. Maximum 10 items for tcp and udp port mapping. Ipsec alg: enable/disable ipsec alg; ftp alg: enable/disable ftp alg; pptp alg: enable/disable pptp alg; transfer type: transfer type using port mapping. Inside ip: lan device ip for port mapping. ...
At-530 user manual 15/50 2.5.3 net service http port: configure http transfer port, default is 80.User may change this port to enhance system’s security. When this port is changed, please use http://xxx.Xxx.Xxx.Xxx:xxxx/ to reconnect. Telnet port: configure telnet transfer port, default is 23. Rtp i...
At-530 user manual 16/50 2.5.4 firewall settings firewall setting page. User may set up firewall to prevent unauthorized internet users from accessing private networks connected to the internet (input rule), or prevent unauthorized private network devices to access the internet. Access list support ...
At-530 user manual 17/50 2.5.5 qos settings at-530 ip phone implement qos based on 802.1p, the qos is used to mark the network communication priority in the data link/mac sub-layer. At-530 will sorted the packets using the qos and sends it to the destination. Vlan enable: if enable the vlan service,...
At-530 user manual 18/50 2.5.6 advance sip settings this page is used to set the private sip server, stun server, and back up sip server information. Stun server setting: stun server addr: configure stun server address; stun server port: configure stun server port default 3478 stun effect time: stun...
At-530 user manual 19/50 for how to configure private sip server. Please refer to sip_config voipon www.Voipon.Co.Uk sales@voipon.Co.Uk tel: +44 (0)1245 808195 fax: +44 (0)1245 600030
At-530 user manual 20/50 digital map digit map is a set of rules to determine when the user has finished dialing. Ag-188 support below digital map: digital map is based on some rules to judge when user end their dialing and send the number to the server. Ag-188 support following digital map: ----end...
At-530 user manual 21/50 2.5.7 call service settings user configure the value add service such as hotline, call forward, call transfer, 3-way conference call .Etc in this page hotline: configure hotline number. At-530 immediately dials this number after hook-off if it is set. Call forward: please re...
At-530 user manual 22/50 2.5.8 mmi filter mmi filter is used to make access limit to at-530 ip phone. When mmi filter is enable. Only ip address within the start ip and end ip can access at-530 ip phone. Voipon www.Voipon.Co.Uk sales@voipon.Co.Uk tel: +44 (0)1245 808195 fax: +44 (0)1245 600030
At-530 user manual 23/50 2.5.9 audio settings codec: select the prefer codec; support ulaw, alaw,g729 and g7231 5.3/6.3 signal standard: signal standard for different area. Input volume: handset in volume. Output volume: handset out volume. Handfree volume: hand free volume handdown time: hand down ...
At-530 user manual 24/50 2.6 dial-peer settings please refer to how to use dial rule for detail. Voipon www.Voipon.Co.Uk sales@voipon.Co.Uk tel: +44 (0)1245 808195 fax: +44 (0)1245 600030
At-530 user manual 25/50 2.7 config manage save config: save current settings. Clear config: restore to default settings. Backup config: backup the config file, via point the right key of mouse- Æ save target as….- Æ will pop a save window, then type the config file name in the file name(the file ty...
At-530 user manual 26/50 2.8 update web update: update ip phone’s settings or firmware. Firmware file is .Z extension when configure file is .Cfg extension, at-530 will auto select configure update or firmware update according the extension. Tftp/ftp update: upload/download the configure file with f...
At-530 user manual 27/50 for instance: gateway original version is: >version:1.0000 conffile version ： 6 user may edit the configure file version to: >version:1.0007 conffile version ： 7 voipon www.Voipon.Co.Uk sales@voipon.Co.Uk tel: +44 (0)1245 808195 fax: +44 (0)1245 600030
At-530 user manual 28/50 2.9 system manage 2.9.1 account manage set web access account or keypad password of at-530. 2.9.2 phone book: user may set contacts in this page, and the contacts will be saved in the memory. Then using the pbook, vol+,vol-,menu/ok and exit keys to choose your friend in the ...
At-530 user manual 29/50 2.9.4 time set: server: type the ip address of time server timezone: select correct time zone in list box timeout: longest response time for sntp manual timeset: the time setting daylight: daylight saving time 2.9.5 reboot: reboot ip phone, some setting needs to reboot to ma...
At-530 user manual 30/50 3 use keypad configure at-530 ip phone 3.1 keypad function user can configure at-530 through its keypad. List below is the keypad function keypad mode function/display idle mode ---- show current time sysinfo idle mode circularly show phone number,wan ip, gateway info idle m...
At-530 user manual 31/50 3.2 keypad menu user may use set, menu/ok, exit, vol+ , vol- to config at-530 detail setting. Press menu/ok to enter config mode, and the default password is 123. Below list the keypad menu of at-530 at-530 keypad menu level 1 level 2 level 3 level 4 bridge mode ip netmask d...
At-530 user manual 32/50 transfer ip port end with # switch dial-rule fixed length length public reg reg status private reg detect-server dtmf-mode interval-time swap-server rfc-version signal-port switch addr port sip stun expire time codec handdown-time dtmf-volume input-volume dsp output-volume s...
At-530 user manual 33/50 4 telnet console 4.1 introduce 4.1.1 basic structure user may use telnet command to access and manage ip phone. At-530 adopts tree structure for telnet. Every node contains its sub-nodes or local command. User can type “help” or “?” whenever to see sub-nodes and all local co...
At-530 user manual 34/50 4.2 global command global command is available under all nodes, at-530 support following commands: command function example chinese set to chinese ui #chinese clear clear telnet screen #clear english set to english ui #english exit return to parent-node #exit help show help ...
At-530 user manual 35/50 5 tree structure 5.1.1 account path: # [stop]start syslog ---syslog [no] start configure syslog server address and port ---syslog server –ip x.X.X.X _port xxx example: ##server –ip 202.112.20.10 show syslog settings ---syslog show show all account settings ---show 5.1.2 conf...
At-530 user manual 36/50 show current dhcp rules ---dhcpshow show lan port ip address ---ipshow show nat info ---natshow change lan port ip address ---ip –addr x.X.X.X –mask x.X.X.X example: #ip –addr 192.168.1.10 –mask 255.255.255.0 ¾ wan interface settings path: # [disable]enable dhcp client ---[n...
At-530 user manual 37/50 show http access setting ---http-port set telnet access port ---telnet-port xxx show telnet access port ---telnet-port set rtp initial port and quantity ---media-port –startport xxx –number xxxx example: #media-port –startport 10000 –number 200 add route rule ---route –gatew...
At-530 user manual 38/50 disable call forward ---no callforward [disable]enable call transfer ---[no]calltransfer [disable]enable call waiting ---[no]callwaiting set prefer codec ---codec xxx set dtmf gain ---dtmfvolume xxx set black list ---in-limit xxx show black list ---in-limit set input volume ...
At-530 user manual 39/50 set alter server info ---alter-server register –ip x.X.X.X _port xxx _user xxx _password xxx [disable]enable stun server ---stun [no]enable set stun detecting interval time ---stun interval-time xxx set stun server ip and port ---stun –ip x.X.X.X –port xxx show current sip i...
At-530 user manual 40/50 5.1.3 debug (level 0~7) path: # show debug setting ---show [disable]enable debug all modules ---[no] all xxx [disable]enable debug app module ---[no] app xxx [disable]enable debug cdr module ---[no] cdr xxx [disable]enable debug sip module ---[no] sip xxx [disable]enable deb...
At-530 user manual 41/50 path: # show lan status and dhcp server info example: ## dhcp-server ¾ dial-rule path: # show digital-map info example: ## dial-rule ¾ interface path: # show lan info example: ##interface fastethernet lan show wan info example: ##interface fastethernet wan ¾ ip path: # show ...
At-530 user manual 42/50 ¾ nat path: # show nat information example: ##nat ¾ port path: # show caller-id info example: ##port callerid show dsp info example: ##port dsp show hotline info example: ##port hotline show black list info example: ##port in-limit show outgoing limit info example: ##port ou...
At-530 user manual 43/50 ¾ version path: # show ip phone version example: ## version 5.1.8 telnet and logout usage: #telnet –target -port login:xxx password:xxx # #logout 5.1.9 timesettings path: # ---manualset –year xxx –month xxx –day xxx –hour xxx –minute xxx –second xxx example: #manulset –year ...
At-530 user manual 44/50 6 network diagnosis there are some telnet commands for checking your network. Now listing below for your information command function example ping check if the destination is accessible #ping www.Google.Com tracert show network path info #tracert www.Google.Com show basic sh...
At-530 user manual 45/50 8 post mode(safe mode) at-530 provide safe mode. When there is booting problem because of setting problem or firmware problem. User can restore the factory setting or upgrade to a new firmware to solve this problem. How to enter safe mode? There will be a schedule bar in the...
At-530 user manual 46/50 9 faq 9.1 how many servers may at-530 register simultaneously? At-530 is able to register two sip servers simultaneously, and redundancy servers. User can configure the dial peer to route calls between these servers. Please refer “how to use the dial rule?” for detail. 9.2 w...
At-530 user manual 47/50 2t rule : if the call starts with 2, the first 2 will be deleted, and the rest number will be sent to private sip server. 3t rule : if the call starts with 3, the first 3 will be deleted, and the rest number with be sent to public sip server. 123 rule : dial 123 and will sen...
At-530 user manual 48/50 ¾ call forward: ----forward when busy: select busy in the call forward field, and key in the destination phone number in the forward number . If some one calls you when you having a call, the caller will be forwarded to the destination number. ----forward no answer: select n...
At-530 user manual 49/50 9.7 how to use the record function? At-530 provides record function. With this function, user may record three voip message and one local message. Active answering machine: select “enable voice record” to active answering machine, and config no answer time. If there is an in...
At-530 user manual 50/50 9.8 how to use set the ip type via keypad? In the idle mode, user may us the keypad to set the ip type as the below procedure: keep pressing the button 1 for changing to static mode. Keep pressing the button 2 for changing to dhcp mode. Keep pressing the button 3 for changin...
