VoipTel Yealink T28 User Manual - 5. Call Transfer
4. Deactivating the Microphone (Mute Function)
To deactivate the microphone during a conversation or a conference call, press the
. key. The display
will show the
icon.
To reactivate the microphone of the phone, press the
key again.
5. Call Transfer
There are two ways to transfer a call:
blind transfer
where the number to transfer the call cannot decide
whether or not to accept the call transfer or the
hold call transfer
, where this option is available.
5.1.
Blind Transfer
During a conversation press the
key to place the incoming call on hold. At this point you will hear a
dial tone and you can enter the number of the person to transfer the call to and press the
key again to
transfer the call. The call will be transferred and you will be disconnected from the call placed on hold earlier.
5.2.
Trasferimento con attesa
Durante una conversazione premere il tasto
per mettere in attesa la chiamata in arrivo, A questo
punto si sente il tono di linea ed è possibile digitare il numero della persona a cui trasferire la chiamata.
Aspettare quindi senza premere alcun tasto che la chiamata venga effettuata. Appena il numero chiamato
risponde è possibile decidere se passargli la chiamata o meno.
Per trasferire la chiamata definitivamente premere semplicemente il tasto
o riagganciare la
cornetta
Nel caso il trasferimento di chiamata venga rifiutato è possibile riprendere la chiamata messa
precedentemente in attesa premendo prima il softkey
Canc.
e successivamente il softkey
Riprendi
.
6. Conference Calls (max 3 people)
During a conversation press the
psoft key to place the incoming call on hold.
At this point you will hear a dial tone and you can dial the number of the person to be added to the
conference call. . Press the
Send
soft key. As soon as the called party answers, you can add it to the
conference by simply pressing the
. soft key. To end the conference call, simply hang up the receiver
thereby ending the call with both parties.
7. Call Waiting
Requirement:
Call waiting must be activated as a feature on your phone. To enable/disable call waiting,
press the
Menu
soft key, select
Functions
using the
directional key and confirm with the
Next
soft
key. Then select the
2
nd
call using the
directional key and confirm with the Next soft key.
. Using
left/right key on the
2
nd
call
you can enable/disable the feature. Confirm you selection by pressing
the
Save
soft key.
3