© voi speed l td . V-usb400 telephone user manual.
© voi speed l td . 2 table of context table of context .................................................................................................................... 2 1 introduction ..................................................................................................................
© voi speed l td . 3 1 introduction we would like to thank you for your purchase and for having chosen one our products. This manual provides general guidelines for a correct use of the product. In case you require further information on this product or to receive technical assistance please visit o...
© voi speed l td . 4 2.7 connect the power supply please make sure that the power supply complies with the voltage setting of your equipment. If you have doubts about the voltage setting, please call the technical support. Do not remove any devices that provide security. Always disconnect the teleph...
© voi speed l td . 5 2.10 product warranty the manufacturer (harpax srl.) warrants its products to be free from defects in material and workmanship during the warranty period. The product is covered by warranty only if it is used in compliance with the guidelines contained in this manual. This produ...
© voi speed l td . 6 3 quick start connect the telephone v-usb400 to one of the free usb ports of a pc or usb hub. The usb port will also power the equipment. The telephone driver will be automatically installed during the setup phase of the voice client software. All telephone functionalities are a...
© voi speed l td . 7 6 how to use the usb telephone keys description headset state indicator the lamp is lit when the headset connected to the telephone is active . Power indicator the lamp is lit when the telephone is powered (i.E. Connected to the pc through one usb port). In / out these keys are ...
© voi speed l td . 8 vol+ / vol- to increase or decrease the volume of the headset, loudspeaker or ringtones. Send this key enables the user to begin a phone call. Loudspeaker enable/disable the loudspeaker during a phone call. It is also used to answer an incoming call through the loudspeaker. Clea...
© voi speed l td . 9 6.1.3 put a call “on hold” or pick-up a call from “on hold” state • press hold 6.1.4 transfer a phone call in order to transfer a phone call to another number: 1. Put the call “on hold” pressing the hold button. 2. Enter the recipient’s phone number 3. Press send 4. Once the rec...
