Volfoni ActivHub IR100 User Manual - page 8
4.2 - Technical specifications
Please see below the connection diagram for the settings.
Please refer to the following technical board for the digital projector.
These parameters are for information, it could be adapted if
necessary.
tEcHNIcAL SPEcIFIcAtIoNS
Warning:
Depending on your equipment and the room configuration,
you may have to adjust these parameters. We recommend to
confide the set-up of 3D parameters and color adjustments directly
to integrators.
For any trouble, please consult our website www.volfoni.com,
or send an email to support@volfoni.com.
For any trouble, please consult our website
www.volfoni.com,
or send an email to
support@volfoni.com.
fall time
rise time
Contrast > 1:150 (no ghosting)
transmission in the clear state
chromaticity
Standard parameters
EdGE 1.0™ PcE SEriES
Double flash (4.2)
Triple flash (6.2)
EdGE 1.0™ Stn SEriES
Double flash (4.2)
Triple flash (6.2)
weight
battery
autonomy
darktime:
500
delay:
-200
darktime:
800
delay:
-200
darktime:
500
delay:
-320
darktime:
800
delay:
-320
58 grs (2 ounces)
Disposable
300 hrs
9.
0.2 ms
1.8 ms
> 1:150 (no ghosting)
33%
Color correction not
mandatory