Volfoni EDGE 1.2 User Manual - Product Description
II.
PRODUCT DESCRIPTION
Laser Pointer ON/OFF
Local IR Emitters ON/OFF
Frame SYNC Setup Switch
Eye Rotation Switch
Distribution Module Extension Port
Power Input Port
Power Switch
CH1,2,3,4 SYNC Port to IR Emitter
Frame SYNC From Projector
Switch Function Description
LASER POINTER:
ON/OFF switch for each emitter laser.
LOCAL IR EMITTERS:
ON/OFF switch for local IR emitters. Location IR emitters
are very convenient to check 3D effect on screen.
SETUP FRAME SYNC:
Switch on to detect frame synchronizing range.
EYE INVERSION:
Switch left/right eye image.
POWER:
Turn ON/OFF the power of the Distribution Module.
Indication LED status definition
POWER:
LED lights come on when power is on, otherwise lights are out.
CH1:
Red LED lights come on when channel 1 IR emitter is detected,
Green LED lights come on if the IR emitter is activated, otherwise lights are out.
CH2:
Red LED lights come on when channel 2 IR emitter is detected,
Green LED lights come on if the IR emitter is activated, otherwise lights are out.
CH3:
Red LED lights come on when channel 3 IR emitter is detected,
Green LED lights come on if the IR emitter is activated, otherwise lights are out.
CH4:
Red LED lights come on when channel 4 IR emitter is detected,
Green LED lights come on if the IR emitter is activated, otherwise lights are out.
LED light on when frame synchronizing
SETUP FRAME SYNC:
LED always light when input frame is synchronized
between 130Hz to 150Hz, otherwise LED flickers.
FRAME SYNC FROM PROJECTOR:
signal is detected from projector.
Basic Specification
Power Input
: 24VDC, 3A
Default Sync In
: PIN9 (+) and PIN28 (-) of GPIO(DB-37)
Dimension
: 106 mm x 36 mm x 23 mm
POWER
CH1
CH2
CH3
CH4
EYE ROTATION
QUICK FRAME SYNC
SETUP FRAME SYNC
LOCAL IR EMITTERS
LOCAL IR EMITTERS
OUTPUT TO IR EMITTERS
LASER POINTER
ON
FRAME SYNC FROM PROJECTOR
OFF
ON OFF
ON OFF
ON OFF
11.