1. DL manuals
  2. Volkswagen
  3. Car Stereo System
  4. 5U0 035 152
  5. User Manual

Volkswagen 5U0 035 152 User Manual

Summary of 5U0 035 152

  • Page 1

    5u0 035 152 user manual prepared by hector gomez hmi/ vwm dtee / 52-222-2307414 doc_hmi radio 1 din mib-g lam x1.8 / 11/10/2011 page 1 of 65.

  • Page 2

    Contents 1. Anti-theft coding 2. Factory mode (code bypass mode) 3. Radio on/off 4. Radio volume adjustment 5. Fm/am operation 6. Media operation 7. Cd operation 8. Cd-mp3 / usb operation 9. Aux operation 10. Bt audio operation 11. Ipod operation 12. Phone operation 13. Audio / setup 14. Mfl key fun...

  • Page 3

    1. Anti-theft coding role of radio coding removing the unit from the vehicle (for example, if you take your vehicle to the dealership for service and requires disconnecting the battery) will be necessary to recode the radio manually. If you install the radio in another vehicle, the recode also must ...

  • Page 4

    Incorrect numeric code if you have accidentally entered a wrong number, “code 1 safe” will appear blinking in the display, then “code 1 1000”. You can repeat the process again. The number of attempts will be displayed. If you accidentally re-enter a wrong number again, “code 2 safe” will appear fixe...

  • Page 5

    3. Radio on/off push left encoder to switch radio on/off. Without ignition key inserted (kl.30: on, kl.15 & contact s: off), push left encoder may switch on radio to work per 30 minutes, after 30 minutes, radio will power off automatically. Each time radio turns on, radio’s audio is started immediat...

  • Page 6

    4. Radio volume adjustment rotating left encoder may adjust radio volume level; radio will display the volume level bar per 5 seconds. Rotate clockwise, increase radio volume; rotate anti-clockwise, decrease radio volume. For fm/am modes: rotate the volume 0 will mute the radio’s sound, restricted f...

  • Page 7

    5. Fm/am operation 5.1 band selection non radio mode, short press hkbutton may switch to fm 1 (if radio turns on first time) or lsm. Short press [fm / am] button repeatedly will select bands in the following order: fm1fm 2fm asamam asfm 1. If the user is listening a station at moment to change the b...

  • Page 8

    Am preset memories. Display will show “initial as” during the process. The stations will store in the soft key buttons 1 to 6 since lower to higher frequency. Radio display will show 1 to 6 in the bottom line. Function is repeatable for any number of times. All presets have to be prepared with real ...

  • Page 9

    By initial auto store, for fm/am as level, the preset stations are completely same as by auto store. For fm2, if the stations are = if the stations are > 6, then fm1 and fm2 are treated as one fm level. If none station is found, radio will display “no station" per 2 seconds and then returns to the f...

  • Page 10

    Scan indication is blinking 1.5 seconds (750ms on/750ms off) in the display during the scanning. 5.6 manual tune rotating theright encoder may manually tune radio frequency. Rotate clockwise, increase the frequency. Rotate anti-clockwise, decrease the frequency. 5.7 preset stations list function not...

  • Page 11

    6. Media operation it is possible to connect to the radio the following devices additional to cd player operation: • • • usb memory or ipod aux connection bluetooth audio device (a2dp/avcrp profiles) radio is in fm mode and previous mode was cd, and the cd inserted in the slot. Short press hk button...

  • Page 12

    If cd / usb / ipod /sd card has not files, radio will display no file per 2 seconds and radio reverts to lsm. If cd / usb / ipod /sd card has files, but they are not supported by radio, radio will display not support per 2 seconds and radio reverts to lsm. At moment to insert aux’s plug into the rad...

  • Page 13

    Prepared by hector gomez hmi/ vwm dtee / 52-222-2307414 doc_hmi radio 1 din mib-g lam x1.8 / 11/10/2011 page 17 of 65.

  • Page 14

    7. Cd operation 7.1 cd insertion at moment to insert cd, the display will show reading all of the time until radio is ready to play and then changes to active cd mode. During reading process, volume adjustment and any other functions are not allowed; radio is muted. In case to insert a cd upside-dow...

  • Page 15

    7.3 cd mode select non cd mode, short press hk inserted cd. Button may switch to cd mode if it was the lsm and then plays the if cd was not lsm, short press sk 1 [ ] button and then plays the cd inserted. 7.4 track up/down rotating right encoder or short press left/right arrow button may select the ...

  • Page 16

    Keep pressed left/right [ fast playing action. ] arrow buttons may fast rewind or fast forward, release button will cancel fast rewind operation in the first track of the cd must stop at the beginning of this track and resume normal operation; otherwise the fast rewind operation will continue in all...

  • Page 17

    Cancel the scanning is short press the remains in this track). If current track play time 3 sec, short press and will play the previous track. If current track play time > 3 sec, short press current track. Short press right encoder during the 10 seconds of track playing (playback button during scann...

  • Page 18

    If the cd text has not information, radio will not display any indication. Each time short press sk 1 [] button will change according to the information showed, the title, artist or album name must be scrolled if name length is large, radio will display “title, artist or album” and show the underlin...

  • Page 19

    8. Cd-mp3 / usb play operation 8.1 cd-mp3 / usb mode select select cd mp3 / wma mode is same as 7.3 cd mode select select usb mp3 / wma mode is same as 6. Media operation 8.2 cd-mp3 / usb / sd card indications in the upper line, display will show the mode to play: cd or usb. During the first 2 secon...

  • Page 20

    Short press sk 2 [] button may switch to next folder; short press sk 4 [ previous folder. The radio will show the folder and file numbers per 2 seconds and then shows the file name. ] may switch to 8.5 file/folder list short press sk 5 [] button to enter file/folder list, radio will display all the ...

  • Page 21

    Playback order of tracks the root directory of the source is recognized as folder f0. 8.6 fast forward/rewind long press hk play operation. Buttons may fast rewind or forward play current file, release button will cancel fast fast rewind operation in the first file of current folder must stop at the...

  • Page 22

    8.7 mix play short press in sequence sk 3 [ ] button will switch in order: mix folder -> mix all -> mix off. Radio must play randomly all of the tracks in the folder / cd / usb, once all the tracks have been played, a new random track list must be generated. Note: the played tracks shall be written ...

  • Page 23

    In the "one folder" condition: "f+/f-" "rpt" "rpt f" "mix f" "mix a" are required 8.8 scan play enable scan play function with short press the right encoder. Radio will scan all the files of current folder and subfolders, each file will be played for 10 seconds. Radio will stop scan function automat...

  • Page 24

    The 3 short press [ rd ] button will disable repeat function, revert to normal play. If select to repeat file/track, radio will repeat the playing of current file/track, it means if reach the end of file/track, radio will play this file/track from beginning. If select to repeat folder, radio will co...

  • Page 25

    8.11 scroll display id3 radio will display the file id3 information automatically, in case id3 is long: scrolling complete information one time 5 seconds showing only part of information scrolling complete information one time and so on. Id3 will convert automatically from minuscule to capital lette...

  • Page 26

    8.12 pause rotate the volume 0 will pause the music, restricted functions: all of media mode with exception of volume adjustment, muted speaker icon appears in the center line of display at the left side; resume music playback when increases the volume again, radio will display the volume level bar ...

  • Page 27

    9. Aux operation 9.1 aux mode select select aux mode is same as 7. Media operation 9.2 aux operation if there is an aux connection, radio will display “aux”. The function allowed in this mode is volume up/down only. Prepared by hector gomez hmi/ vwm dtee / 52-222-2307414 doc_hmi radio 1 din mib-g la...

  • Page 28

    10. Bt audio operation (bt edr 2.4ghz) 10.1 bt audio mode select select bt audio mode is same as 7. Media operation 10.2 bt audio operation if there is a bt audio connection, radio will display “bt audio”. In case of cell phones with avrcp 1.3 or higher, radio display will show immediately the title...

  • Page 29

    11. Ipod operation 11.1 ipod mode select select ipod mode is same as 7. Media operation 11.2 ipod indications after ipod is connected to radio and read out, radio will play from the position where ipod was connected. The initial status can be: ipod play in playlists, artists, albums, songs, genres, ...

  • Page 30

    11.3 track up/down short press hk [] buttons or rotate clockwise/counterclockwise the select the previous or next file to play. Right encoder may if rotate knob continuously users can fast skip the tracks, the max fast skip track number is 5, and the 2 actions in 25 ms, it will be regard as 1 action...

  • Page 31

    There is a triangle to indicate there is an upper level. Rotate the left encoder may decrease/increase radio volume level, radio display remains without change (browse track list), display will not show the volume bar. 60 seconds no action, short press left arrow button in the parent directory or lo...

  • Page 32

    11.7 mix play radio must play randomly all of the files in the current category, once all the tracks have been played, a new random track list must be generated. Short press sk 3 [ ] button, display will underline mix, it means mix function has been activated. Radio must play randomly all of the tra...

  • Page 33

    Cancel the scanning is short press the remains in this track). If current track play time 3 sec, short press and will play the previous track. If current track play time > 3 sec, short press current track. Right encoder during the 10 seconds of track playing (playback button during scanning, radio w...

  • Page 34

    For some strange characters, radio will display “*”; example: byeΨωφ .Mp3 bye****.Mp3 11.11 scroll display id3 same performance as section 8.11 scroll display id3. 11.12 pause rotate the volume 0 will pause the music, restricted functions: all of media mode with exception of volume adjustment, muted...

  • Page 35

    12. Phone operation 12.1 bluetooth operation conditions kl,15 off off off off on contact s off off on on on radio off on off on off/on bluetooth off off off on on 12.2 phone operation non phone mode short press hk [ audio output. ] button will switch to phone menu, it does not interrupt the current ...

  • Page 36

    After user selects sk 1 [yes] in the radio and also in the device, pair is completed. A) if no action after 60 seconds, radio will switch to previous bt menu. If cell phone connects to radio, radio will display cell phone name, it must be scrolled if name length is large, bt icon and the indication ...

  • Page 37

    Radio will disconnect the current cell phone and waiting for new phone cell. Pairing process will same as 12.3 bluetooth pairing, case 1. Radio will replace the new paired cell phone by the seldom used phone which latest time was earliest. And in the following case, nokia 5310 will be replaced by ne...

  • Page 38

    Rotate theright encoder to select the phone to be deleted; short press right arrow button or right encoder may select the phone focused on by the cursor (small filled triangle). Radio will display a slide bar if there are more than 4 phones. Rotate the left knob may decrease/increase radio volume le...

  • Page 39

    If cell phone connects to radio, radio will display cell phone name, bt icon and the indication “connected” per 2 sec; 5 sec timeout, radio will exit the bt menu display and reverts to lsm. The current audio output must remain without change. The phonebook is updated each time that bluetooth connect...

  • Page 40

    If the call ends or short press sk 6 [ ] or hk [ ] button, radio will switch back to lsm. 12.7 redial a call in phone menu, short press sk 1 [ ] button radio will display the latest 15 phone calls (answered phone: ; missed phone: !) and phone calls must be scrolled if name or number length is large;...

  • Page 41

    If the dialed phone is rejected, radio will revert to previous mode. If the call is answered, radio will switch to active call mode. 12.9 incoming call in any mode, a phone call is coming, the radio will display the phone number of the call (total number will be fully displayed) or contact name. Rad...

  • Page 42

    12.12 call end during an active phone call, short press hk [ and then revert to lsm. ] button or sk 6 [ ] button to end the current call 12.13 private / handsfree - talking mode switch during an active phone call, short press sk 1 [ handsfree. Default mode is handsfree. ] button, talking mode will b...

  • Page 43

    Short press sk 3 [] button again, microphone will be enabled. The display indication “mic” stop the flashing and the mic indication underline will be deleted. 12.15 bluetooth on operation while kl.15 and contact-s are off, the bluetooth function is off, only after contact-s is on, the bluetooth func...

  • Page 44

    Case 2: kl.15/contact-s are off, radio is in fm mode, cell phone (samsung e628) was connected to radio in the last time when kl.15 was on. Short press hk [ ] button, radio will display “ignition off” per 2 sec. And also output a beep sound. After kl.15 is switched on (enable kl.15) radio display wil...

  • Page 45

    Cell phone located far from radio, users turn off cell phone bluetooth function, and radio will display disconnected per 2 sec. If kl.15/contact-s are off, short press hk [ radio will also output beep sound. ] button, the “ignition off” will be displayed per 2 sec., 12.17 bluetooth ongoing call and ...

  • Page 46

    13. Audio / setup 13.1 audio setting short press hk [ ] button will enter audio setting menu. Users may adjust audio parameters via rotating the right knob or short press short press button to increase levels. Button to decrease levels or rotate the left knob may decrease/increase radio volume level...

  • Page 47

    • treble setting range: -9 to +9 • balance setting range: l9 to r9 • fader setting range: f9 to r9. Prepared by hector gomez hmi/ vwm dtee / 52-222-2307414 doc_hmi radio 1 din mib-g lam x1.8 / 11/10/2011 page 51 of 65.

  • Page 48

    • equalizer setting range: user => rock => pop => classic => jazz => user note: values to be used: eq setting default (or as user defined these values) rock pop classic jazz volume (db) bass (db) middle (db) treble (db) 0 0 0 0 0 0 2 -2 2 3 0 3 3 -3 1 0 2 -2 2 1 ] button will exit the audio setting ...

  • Page 49

    13.2 setup short press hk [ ] will enter setup menu, bluetooth icon is not showed in this mode. Button to decrease users may select the item and rotate right knob to adjust the value or short press levels or short press button to increase levels. Rotate the left knob may decrease/increase radio volu...

  • Page 50

    • pdc-vol setting range: 0 => 1=> 2 => 3 => 0 note: the user can adjust the pdc-vol level in four steps: attenua. 0 = without attenuation attenua. 1 = low attenuation (volume 13) attenua. 2 = mid attenuation (volume 7) attenua. 3 = (default) high attenuation (volume 0) during the adjustment, no acti...

  • Page 51

    14. Mfl key function short description these features are based according to highline-kombi-mmi (pq35x, pq46x, t5-gp) version 1.4 (mj2009) dated 29.03.2007; mib-g_bap-mscs_audio_v1.03.Pdf, mib-g_audio_fsg_bedatung_p30df31_mj2013_v1.06_f.Pdf all the functions are done with left control panel of steer...

  • Page 52

    If short press once in tuner, cd, mp3, usb, bt audio, ipod modes, radio will seek up or track up. If long press, radio will perform target seek up or fast forward in track. 6. Dial voice short press this button, radio activates communication channel to make a call in voice dialing mode, user needs t...

  • Page 53

    15. Mfa indications. Radio information such as tuned station, cd track and volume are displayed when radio is turned on and the board computer screen is active. Information regarding telephone calls and cell phones are also displayed in the remote display. These indications are based according to hi...

  • Page 54

    Prepared by hector gomez hmi/ vwm dtee / 52-222-2307414 doc_hmi radio 1 din mib-g lam x1.8 / 11/10/2011 page 58 of 65.

  • Page 55

    Prepared by hector gomez hmi/ vwm dtee / 52-222-2307414 doc_hmi radio 1 din mib-g lam x1.8 / 11/10/2011 page 59 of 65.

  • Page 56

    16. Ops indications ops information is displayed when radio is turned on and if radio is off when ops mode is activated then radio must be turn on while ops indications are active. Bluetooth icon is not showed in this mode. The indications shown in this document are the required for this radio. The ...

  • Page 57

    17. Diagnostic mode in case of diagnose over can, the display only will show “diag on”. Bluetooth icon is not showed in this mode. Prepared by hector gomez hmi/ vwm dtee / 52-222-2307414 doc_hmi radio 1 din mib-g lam x1.8 / 11/10/2011 page 61 of 65.

  • Page 58

    19. Software update while radio is powered on, insert usb or sd card, usb or sd card has software update file plus other files. Radio will switch to software update mode if long press more than 5 sec sk [1] and [5] buttons. Bluetooth icon is not showed in this mode. The maximum time is 15 minutes fo...

  • Page 59

    20. Radio display per vehicle prepared by hector gomez hmi/ vwm dtee / 52-222-2307414 doc_hmi radio 1 din mib-g lam x1.8 / 11/10/2011 page 65 of 65.