Volkswagen RCD550 Installation Manual
1 / 4
RCD550 interface installation manual_v120303
[product type: FV‐RCD550]
This interface can insert High definition RGB navigation video,
AV and reverse camera video onto RCD550 car screens. The features
are:
A daughter board is used to insert High definition RGB
navigation and other video onto
the OEM screen.
Oem NAVI key is used to switch
the
video
input.
Reverse
camera
trigger
signal
is
automatically generated.
Guaranteed digital video quality
on screen. Which also offer very
nice reliability.
1.System connection
The daughter board with isolation tube is used to switch
the video from board to LCD.
Insert the red ribbon of LCD onto the daughter board,
while insert the white ribbon back to OEM PCB socket.
NAVI AV1,AV2 Rearview
3 keys for
color tuning.
Extra keypad
The 4P touch panel should go
through the daughter board
thus the touch can be used to
installed
navigation
computer.
Touch
to
external navi
To Interface’s
CTRL port
The CAN box’s 4 input wires should be wired to the rear of the RCD550:
Red with fuse‐‐‐‐to‐‐‐constant BATT or ACC
Brown ‐‐‐‐to‐‐‐ car chassis for Ground.
Blue ‐‐‐‐to‐‐‐ CAN bus+ [printed on the top of head unit.]
Gray ‐‐‐‐to‐‐‐ CAN bus‐
Correct connection will make the can box’s LED when working.