Volt VPL-1006 Installation instructions manual - page 4
INSTALLATION INSTRUCTIONS
Place the fixture hat back onto
the cage and secure with the set
screws previously removed. Hand
tighten until snug.
Reinstall Fixture Hood
6
Install LED Bi-Pin Candle
5
Led Bi-Pin
Candle
Upper
Socket
Hat Cage
Insert Ultra Realistic LED
Moving Flame Bi-Pin Candle
CAUTION: Do not exceed
maximum wattage marked
on luminaire label.
w w w . v o l t l i g h t i n g . c o m
- 6 -
customersupport@voltlighting.com • 813.978.3700
- 7 -
Cage
Fixture
Hat
Set Screws
Install Rod
7
Stem Extension
Support Stem
Assembly
Supply
Wires
Pass supply wires through the stem
extension and thread the stem
extension onto the support stem
assembly. Hand tighten until snug.
Install Stake
8
Board
Stake
Soil
Ground
VOLT
®
Coachman Path and Area light
VPL-1006
Determine your desired location
for mounting the fixture. Hammer
stake into ground until the flange of
the stake is flush to grade. To avoid
damage to stake, place a board on top
of stake while hammering.
NOTE: If ground is hard and stake is
difficult to install, make a crosscut in
ground using a flat shovel.