Voltek CT100 Installation & User's Instructions - page 3
PACKAGE CONTENTS
CONNECTING THE CAMERA
Please check and identify all the parts before proceeding with the installation.
Before you install the camera and the cables, we recommend that you temporarily
connect the camera to your TV (television) or VCR (video cassette recorder) to
help determine the best position for the camera.
The MicroCam will connect to a spare scart socket (also known as a peritel or
Euro connector) on your TV or VCR.
CONNECTING DIRECT TO A TV
If you do not want to record the camera pictures on your VCR, simply connect the
camera as shown.
MicroCam with
2metre lead
18 metre
scart lead
12V Power
Supply
Fixing Kit
Page 2
The bracket can be attached to the camera in two different ways as shown.
Use the cable clips provided to hold the cable in place.
Please bear in mind the following points.
Keep the cable away from other cables where possible to
reduce the risk of picture and audio interference.
Avoid laying the cable next to anything which runs hot which
could burn the cable.
If the cable is run along the ground, a protective covering
must be used to prevent damage to the cable.
Page 5