Volvo VCC-129387 Installation Instructions Manual - page 10
12
A3902556
Installing the internal base module
Templates are provided to facilitate installation of the internal
base module. The templates are necessary because the black
shading on the windscreen may conceal the external base
module.
Cut-out the two templates found at the start of the instructions
Align one template on the installed external base module. Secure
it using tape
Carefully clean the interior surface of the glass. Use the cleaning
cloth supplied. Wipe dry using a rag
Install the second template on the interior, edge to edge with the
external template.
The internal and external base modules must be positioned
directly opposite each other.
Install the internal module in the cut-out of the second template.
Install the internal module base in the same way as the external
module base
Remove the templates.
Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
© Volvo Car Corporation
Glass mounted GSM combined antenna- 9172729 - V1.0
Page 10 / 17