W Audio Horizon 1100 User Manual

Manual is about: HORIZON SERIES

Summary of Horizon 1100

  • Page 1

    Professional power amplifier horizon series user manual thank you for buying this w audio product. To take full advantage of this product, please keep this manual and read the operating instructions carefully. Content z safety instruction……...……………………...1 z connections (signal output)..……………..6 z ma...

  • Page 2

    1- 1. Safety instructions the lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of un-insulated “dangerous voltage “within the product’s enclosure that may be of sufficient magnitude to constitute a risk to persons. The exclamation p...

  • Page 3

    2- 2.main features the horizon series are professional power amplifiers with advanced switch mode power supply technology for a greater performance. Ideal for mobile performers, dj, bar, meeting rooms, hotels and restaurants etc. The amplifier features: z soft start up z short circuit protection z d...

  • Page 4

    3- 4.front panel z horizon 300 z horizon 600 z horizon 800 z horizon 1100 z horizon 1300 for the front panels of the horizon series amplifier, all the models have the same functions knobs and led indicators. 1) power switch press this switch to power up the amplifier. 2) power led (green) this led i...

  • Page 5

    4- 5.rear panels: z horizon 300 z horizon 600 z horizon 800 z horizon 1100 z horizon 1300 1) low cut fuction 75hz-24db/oct low cut function (optional) 2) mode switch the amplifier is shipped in “stereo “mode. You can select between stereo, bridge, or parallel mode. 3) input sensiticity selector for ...

  • Page 6

    5- 6.connections (signal input) 1)unbalanced wiring: fig. 1- signal input using a 1/4” mono jack cha & chb signal input: use a mono jack- tip = signal sleeve= ground fig.(1) for balanced wiring, you can also use a 1/4” stereo 6.3 jack. 2)cha & chb input/link xlr(female) using a standard xlr (female)...

  • Page 7

    6- 7.connection(signal output) 1)stereo mode fig. 3 - signal output using speakon connector cha & chb signal output: 1+、2+ signal output (+) connect to speaker (+) 1-、2- signal output (-) connect to speaker (-) fig.(3) 2)bridge mode fig. 4- signal output using speakon connector be sure to set the mo...

  • Page 8

    7- 8.general operation 1、operation procedures: 1) connect to the matching speakers (dependent on operating mode required) 2) make sure all the input & output connections are correct and well located. 3) make sure the mains power supply matches to the power indicated on the amplifier. 4) connect the ...

  • Page 9

    8- 10.troubleshooting you can check some operation problems as detailed below first before calling your dealer. Problem problem cause(s) suggested remedy 1.Power did not turn on 1.Turn on the power. 2.Loose connection of the power cord 2.Make sure the power cord is connected firmly to the mains supp...

  • Page 10

    9- 11.specification model no. Horizon-300 horizon-600 horizon-800 horizon-1100 horizon-1300 stereo 8Ω 100 w×2 200 w×2 250 w×2 340 w×2 400 w×2 stereo 4Ω 150 w×2 300 w×2 400 w×2 550 w×2 650 w×2 thd+n≤0.1% output power 1khz bridge 8Ω 300 w 600 w 800 w 1100 w 1300 w thd+n ≤0.1% imd < 0.1% (stereo 8Ω ) f...

  • Page 11

    10-.