W Audio RM 05 MKII User Manual - Operating Instructions
www.prolight.co.uk
RM 05 MKII
User Manual
4
Receiver panel identification:
1. Telescopic antenna: The telescopic antenna receives the RF radio signal from
the transmitter unit. For optimum reception, extend the antenna fully and orientate
vertically. Reception maybe impaired by obstacles between the transmitter and
receiver. High power electrical equipment can cause unwanted interference.
2. DC power input: The receiver is powered by a standard DC power input
9-15V DC, 300mA regulated voltage supply.
3. Audio output: 6.35mm (1/4”) jack socket outputting an unbalanced,
400mV line level audio output.
4. Power indicator: The LED power indicator will illuminate red when the receiver
is powered on.
5. RF signal indicator: The LED RF Signal indicator will illuminate green
when the receiver unit receives a valid RF radio signal
6. Audio peak indicator: The LED Audio Peak indicator will illuminate amber to
show when the audio signal received by the receiver is reaching the maximum
level. Use the volume controls on the transmitter and receiver to reduce the audio
signal level.
7. Volume control: The receivers output volume is adjustable. Turn the level
control anti clockwise to the lowest setting, or turn clockwise to adjust to the
highest setting.
4
5
6
7
3
2
1