W Audio UHF User Manual - page 6
Receiver features (cont)
11, Battery cover: Open the cover to fit 2 x 1.5V AA Alkaline batteries
12, 6.35mm jack audio output connector (unbalanced high Z): An
unbalanced audio cable with 6.35mm jack plug (such as standard
guitar cable) can be used from this connector to your
amplifier input.
13, Power input connector: Connect the AC adaptor to this socket and then
connect to an AC electrical outlet. (Please use supplied AC adaptor)
Transmitter Features:
1, Power and audio mute switch: Push the switch to the “ON” position, the
indicator will illuminate for a moment. After pushing the switch to the middle
of the “ON” / “OFF” position, it will allow the muting of the audio, avoiding
the “thump” noise that can occur when turning audio signals ON/OFF.
It is recessed to prevent it from being accidently turned off.
2, Gain control switch: Adjust the audio level switch to desired output level
(L = Low, M = Medium and H = High)
3, Antenna
4, 6.35mm Audio Jack plug
5, Low battery indicator This light illuminates when the battery
needs replacing
6, Battery cover: Open the cover to fit 1 x 1.5V AAA Alkaline batteries
3