- DL manuals
- W&T Electronics
- PCI Card
- 13011
- Manual
W&T Electronics 13011 Manual
Summary of 13011
Page 1
37 w&t serial pci cards subject to error and alteration manual serial pci cards models 13011, 13410 13411, 13610 13611, 13812 version 1.4 w&t.
Page 2
38 w&t serial pci cards © 01/2005 by wiesemann & theis gmbh subject to errors and changes: since we can make mistakes, none of our statements should be used without checking. Please let us know of any mistakes or misunderstandings you are aware of, so that we can recognize and eliminate them quickly...
Page 3
39 w&t serial pci cards subject to error and alteration the gradual decline in isa slots in modern pcs has made it ne- cessary to make the functionality of isa cards available for the pci bus as well. W&t has responded by creating an entire family of serial pci interface cards which meet the needs o...
Page 4
40 w&t serial pci cards contents inhalt serial low profile pci cards general characteristics ....................................................... 41 1x 20ma, 1kv isolated, #13410 .......................................... 45 1x rs232 / rs422 / rs485, 1kv isolated, #13610 ................. 49 seri...
Page 5
41 w&t serial pci cards subject to error and alteration low profile pci cards: general characteristics function all serial low profile pci cards add the functionality of maxi- mum four additional serial ports to your pc. One of these ports (port 1) is integrated on the interface card, whereas three ...
Page 6
42 w&t serial pci cards galvanic isolation and esd protection port 1 on all w&t low profile pci interface cards is galvanically isolated from the pc with an isolation voltage of at least 1kv dc, whereas the optional ports 2 through 4 have no galvanic isolation from the pc. Galvanic isolation of the ...
Page 7
43 w&t serial pci cards subject to error and alteration where no ground potential differences can be expected. This would include any peripherals which are located in the direct vicinity of the pc and thus are powered from the same sub-di- vision as well as peripherals which are inherently potential...
Page 8
44 w&t serial pci cards important notes the serial w&t pci cards may be equipped only with the 18x1x series interface modules (e.G. 18811, 18813, 18611, 18411, etc.) which have a supply voltage of 5v dc. The use of 3.3v modules in the18x3x series (e.G. 18831, 18833, 18631, etc. ) will result in dest...
Page 9
45 w&t serial pci cards subject to error and alteration low profile pci card 1x 20ma, #13410 function the w&t pc card model 13410 provides a serial 20ma inter- face with galvanic isolation of 1kv dc on port 1. Ports 2 th- rough 4 may also be used for any three, non-galvanically isola- ted serial por...
Page 10
46 w&t serial pci cards the operating mode can be set separately for both loops using the external wiring of the card. Examples for wiring the pc card in active/passive mode can be seen in the following drawings: rxd + rxd - txd + txd - active / passive 20ma device active tx and passive rx current l...
Page 11
47 w&t serial pci cards subject to error and alteration technical data system bus: 32-bit bus / 33mhz pci standard: pci2.2 / signal voltage: 5v serial ports: one galvanically isolated 20ma-port three non-isolated ttl-ports galvanic isolation: port 1: min. 1kv dc port 2..4: no isolation modes: active...
Page 12
48 w&t serial pci cards.
Page 13
49 w&t serial pci cards subject to error and alteration low profile pci card 1x rs232/rs422/rs485, #13610 function the w&t pc card model 13610 provides on port 1 a switchable serial rs232/rs422/rs485 interface with 1kv dc galvanic iso- lation. Ports 2 through 4 can also be used for any three non- ga...
Page 14
50 w&t serial pci cards rs422 mode the pci card supports one data and one handshake channel each (selectable dtr or rts handshake output) in each direc- tion. The rs422 sender and receiver chips are always active. Rs485 mode in all rs485 modes there is one data channel available in each direction. T...
Page 15
51 w&t serial pci cards subject to error and alteration rs485 4-wire mode / rs485 2-wire mode with echo, automatic control one data channel in each direction is available. The rs485 dri- ver chip is automatically activated for each data transmission and reset to tristate after data output is finishe...
Page 16
52 w&t serial pci cards terminating all rs485 modes require terminating the bus system with a ter- mination network which ensures a defined rest state in the tris- tate phases of bus operation. The bus system can be connected to a termination network on the pc card by closing dil swit- ches 6 and 7:...
Page 17
53 w&t serial pci cards subject to error and alteration bus a (-) bus b (+) bus a (-) bus b (+) rs485 2-wire application data out a data out b data in a data in b rs485 interface 1 6 2 7 rs485 device rs485 device data out a data out b data in a data in b rs485 interface 1 6 2 7 rxd a (-) rxd b (+) t...
Page 18
54 w&t serial pci cards technical data system bus: 32-bit bus / 33mhz pci standard: pci2.2 / signal voltage: 5v serial ports: one galvanically isolated, selectable rs232-/rs422-/rs485-port three non-isolated ttl-ports galvanic isolation: port 1: min. 1kv dc port 2..4: no isolation modes: rs232 rs422...
Page 19
55 w&t serial pci cards subject to error and alteration standard pci cards: common characteristics function all w&t serial interface cards for pci bus systems add the func- tionality of maximum four additional serial ports to your pc. Two of these ports (port 1 and port 2) are integrated on the inte...
Page 20
56 w&t serial pci cards galvanic isolation and esd protection ports 1 and 2 on all w&t pci interface cards are galvanically isolated from each other and from the pc with an isolation vol- tage of at least 1kv dc, whereas the optional ports 3 and 4 have no galvanic isolation from the pc. Galvanic iso...
Page 21
57 w&t serial pci cards subject to error and alteration it must be noted however that the optional ports 3 and 4 are not galvanically isolated from each other or from the pc, so that these ports may be used only for connecting peripherals where no ground potential differences can be expected. This w...
Page 22
58 w&t serial pci cards important notes the serial w&t pci cards may be equipped only with the 18x1x series interface modules (e.G. 18811, 18813, 18611, 18411, etc.) which have a supply voltage of 5v dc. The use of 3.3v modules in the18x3x series (e.G. 18831, 18833, 18631, etc. ) will result in dest...
Page 23
59 w&t serial pci cards subject to error and alteration function the serial w&t module base board 13011 together with w&t interface modules provides two independent serial interfaces with galvanic isolation of 1kv dc as well as two serial interfaces without galvanic isolation. Integration of the int...
Page 24
60 w&t serial pci cards technical data system bus: 32-bit bus / 33mhz pci standard: pci2.2 / signal voltage: 5v serial ports: two galvanically isolated ttl ports two non-isolated ttl ports note: the card can be configured with modules of various interface types galvanic isolation: port 1,2: min. 1kv...
Page 25
61 w&t serial pci cards subject to error and alteration pci card 2x 20ma, #13411 function the w&t pc card model 13411 provides on port 1 and port 2 two independent serial 20ma interfaces with galvanic isolation of 1kv dc. Ports 3 and 4 can be used also for any two non- galvanically isolated serial i...
Page 26
62 w&t serial pci cards the mode can be set independently for both loops using the external wiring of the card. Examples for wiring the pc card in active/passive mode are shown in the following drawings: rxd + rxd - txd + txd - active / passive 20ma device active tx and passive rx current loop appli...
Page 27
63 w&t serial pci cards subject to error and alteration technical data system bus: 32-bit bus / 33mhz pci standard: pci2.2 / signal voltage: 5v serial ports: two galvanically isolated 20ma ports two non-isolated ttl ports galvanic isolation: port 1,2: min. 1kv dc port 3,4: no isolation modes: active...
Page 28
64 w&t serial pci cards.
Page 29
65 w&t serial pci cards subject to error and alteration pci card 2x rs422/rs485, #13611 function the w&t pc card model 13611 provides on port 1 and port 2 two independent serial rs422/rs485 interfaces with galvanic isolation of 1kv dc. Ports 3 and 4 can be used also for any two non-galvanically isol...
Page 30
66 w&t serial pci cards rs422, rs485 4-wire-bus-master one data and one handshake channel each in each direction is available. The rs422/rs485 driver and receiver chips are always active in this mode. Rs485 4-wire mode / rs485 2-wire mode with echo, handshake control one data channel in each directi...
Page 31
67 w&t serial pci cards subject to error and alteration the dil switch mode settings are shown in the following table: terminating all rs485 modes require terminating the bus system with a ter- mination network which ensures a defined rest state in the tris- tate phases of bus operation. The bus sys...
Page 32
68 w&t serial pci cards rxd a (-) rxd b (+) txd a (-) txd b (+) cts a (-) cts b (+) rts a (-) rts b (+) rs422 de vice rs422 hardware handshake application data out a data out b data in a data in b handshake out a handshake out b handshake in a handshake in b rs422/485 interface pc w ith 13611 1 6 2 ...
Page 33
69 w&t serial pci cards subject to error and alteration technical data system bus: 32-bit bus / 33mhz pci standard: pci2.2 / signal voltage: 5v serial ports: two galvanically isolated rs422-/rs485 ports two non-isolated ttl ports galvanic isolation: port 1,2: min. 1kv dc port 3,4: no isolation modes...
Page 34
70 w&t serial pci cards.
Page 35
71 w&t serial pci cards subject to error and alteration pci card 2x rs232, #13812 function the w&t pc card model 13812 provides on port 1 and port 2 two independent serial rs232 interfaces with galvanic isolation of 1kv dc. Ports 3 and 4 can be used also for any two non- galvanically isolated serial...
Page 36
72 w&t serial pci cards technical data system bus: 32-bit bus / 33mhz pci standard: pci2.2 / signal voltage: 5v serial ports: two galvanically isolated rs232-ports two non-isolated ttl ports galvanic isolation: port 1,2: min. 1kv dc port 3,4: no isolation uart: 16950 with 128 bytes fifo base address...