W & W Manufacturing ECO User Manual - Analyzer
Page 1 of 3
Page 2 of 3
Analyzer ready
Select Chemistry
NiCd
Analyzer Dischg.
1530mAh
.......
Analyzer Rechg.
.......
2000mAh
Batt. Capacity
2000 mAh
Analyzer Chg.
.......
Battery
Charged
Charging
.......
Charger ready
Eco Analyzer/Charger
Analyzer
Charger
OR
No battery Installed,
press Function button
to select Analyzer
or Charger Mode.
No battery Installed,
Function Button
only used in
Analyzer Mode
Display Flashing
Display Flashing
Flashing display
indicates battery is Charged
Analyzer
Charger
Operations
Battery installed, press
function button to
select Batt chemistry,
NiCd or Lithium
Battery installed,
Battery installed,
,
the dots in the lower Right
,the dots in the lower Left
corner will go back and
corner will go back and
Forth indicating the Batt is
discharging and giving the Cap.
As the Batt discharges in mAh
Forth indicating the Batt is
recharging and giving the Cap.
As the Batt. recharges in mAh
Battery installed,
,
the dots in the lower
,
left corner will go
,
back and fourth indicating
the battery is Charging
Battery installed,
The dots in the lower
,
left corner will go
,
back and fourth indicating
the battery is Charging
Display 1
Display 2
Display 3
Display 4
Display 5
Display 6
Battery Analyzed
actual
Capacity of battery in mAh
Table of contents
Page
Description
1
Operation of ECO Analyzer - Charger
2
Analyzer and Charger Displays
3
Cup installation and removal
3
Specifications
READ FIRST
Display (1)
No Battery installed
Display (2)
Battery installed
Display (3)
Battery installed
Display (5)
Battery installed
Display (6)
Battery installed
Display (4)
Battery installed