1. DL manuals
  2. WABECO
  3. Drill
  4. CC-F1200 high speed
  5. Operating Instructions Manual

WABECO CC-F1200 high speed Operating Instructions Manual

Manual is about: Universal drilling and milling machines

Summary of CC-F1200 high speed

  • Page 1

    Operating instructions universal drilling and milling machines version of february 2009 f1200 – f1200 high speed cc-f1200 – cc-f1200 high speed f1210 – f1210 high speed cc-f1210 – cc-f1210 high speed f1410 lf – f1410 lf high speed cc-f1410 lf – cc-f1410 lf high speed walter blombach gmbh tool and ma...

  • Page 2: Index

    2 index ec-conformity declaration 5 1. Dimensions 6 1.1 f1200 – f1210 6 1.2 f1200 – f1210 high speed 7 1.3 f1410 with trapezoid thread spindle 8 1.4 f1410 with ball screw 9 1.5 f1410 high speed with ball screw 10 2. Delivery and installation 11 3. Transport lock 12 4. Start-up and maintenance 13 5. ...

  • Page 3: Index

    3 index cc-f1200 – cc-f1200 high speed – cc-f1210 – cc-f1210 high speed 13.2 electronics – protective cover with 1.4 kw motor 30 13.3 protective cover 31 13.4 milling head with 1.4 kw motor 32 13.6 milling head high speed with 2.0 kw motor 36 13.9 z-column with vertical slide and trapezoid thread sp...

  • Page 4: Index

    4 index 13.32 x-spindle 80 13.33 y-spindle 82 13.36 control console nccad with 1.4 kw motor 88 13.37 control console nccad with 2.0 kw motor 90 13.38 support arm for control console 92 14. Circuit diagram 93 14.1 motor 1.4 kw 93 14.2 motor high speed 2,0 kw 94 14.3 nccad with 1.4 kw motor 95 14.4 nc...

  • Page 5

    5 ec – conformity declaration in the name of the manufacturer walter blombach gmbh tool and machine factory based in remscheid and neuerburg d-42871 remscheid postfach 12 01 61 phone: 0049 (2191) 597-0 fax: 0049 (2191) 597-40 d-54673 neuerburg wabeco str. 1-10 phone: 0049 (6564) 9697-0 fax: 0049 (65...

  • Page 6: 1. Dimensions

    6 1. Dimensions 1.1 f1200, f 1210 with trapezoid thread spindle or ball screw.

  • Page 7: 1. Dimensions

    7 1. Dimensions 1.2 f1200, f 1210 high speed with trapezoid thread spindle or ball screw.

  • Page 8: 1. Dimensions

    8 1. Dimensions 1.3 f1410 with trapezoid thread spindle.

  • Page 9: 1. Dimensions

    9 1. Dimensions 1.4 f1410 with ball screw.

  • Page 10: 1. Dimensions

    10 1. Dimensions 1.5 f1410 high speed with ball screw.

  • Page 11: Delivery and Installation

    11 2. Delivery and installation the drilling and milling machines are carefully packed in our factory. Please check the following upon receipt of delivery: 1. Whether the packaging has been damaged and/or: 2. Whether the drilling and milling machine shows signs of transport damage or if there are re...

  • Page 12: 3. Transport

    12 3. Transport lock f1410 high speed with ball screw attention! The transport lock must be removed prior to the initial start-up of the machine. Please proceed as follows: 1. Remove the wooden block below the milling spindle by slightly moving the milling head upward via the handwheel of the z axis...

  • Page 13: Start-Up and Maintenance

    13 4. Start-up and maintenance after the machine has been professionally installed and securely mounted, it must be connected to the mains supply. 1. A qualified electrician must connect the supply lead of the drilling and milling machine to the local power supply. 2. Provide sufficient lubrication ...

  • Page 14: Start-Up and Maintenance

    14 4. Start-up and maintenance x-axis: to adjust the spindle nut, move the cross table to the centre. After loosening the set screw, the adjusting nut is to be turned a bit in the clockwise direction. Turning the adjusting nut like this achieves a mutual tightening of the two nuts and as a result pl...

  • Page 15: Start-Up and Maintenance

    15 4. Start-up and maintenance z-axis: to adjust the spindle nut of the z-axis, you have to unscrew the cover plate. The further procedure is as for the x-axis. In the case of spindle nuts with ball screw an adjustment is not necessary and also not possible..

  • Page 16

    16 5. Safety devices and recommendations in order to make working with our drilling and milling machines safe, we have equipped them with the following safety devices and thus they are in accordance with the relevant european safety regulations. 1. Protective cover the separating safety device attac...

  • Page 17

    17 5. Safety devices and recommendations we would like to draw your attention to the following safety recommendations which are a result of a combination of the european standards and our own experience: 1. Workpieces must be secured in such a way that they cannot be propelled out of position by the...

  • Page 18: Clamping and Ejecting Tools

    18 6. Clamping and ejecting tools allen key tool retaining/forcing screw main spindle retaining bolt clamping chuck.

  • Page 19: Clamping and Ejecting Tools

    19 6. Clamping and ejecting tools this is the core of the wabeco clamping and ejection system, the tool retaining/forcing screw. It operates on the principle of the screw having a fine thread located at its head and a coarse thread on the shank. Due to this construction, a special procedure has to b...

  • Page 20

    20 7. Assembly and disassembly of collets disassembly take the clamping nut in one hand and press it against the collet as you can see it on the illustration. The lateral pressure exerted on the collet causes the clamping nut to leap so that can easily be taken out of the nut. Assembly put the colle...

  • Page 21: Speed Regulation

    21 8. Speed regulation a specific cutting speed is required when milling different materials (e.G. Steel, aluminium etc.) the r.P.M. Of the work spindle can be infinitely varied from 140-3000 min -1 or 100–7500 min -1 on the potentiometer respectively, so that the appropriate speed for the material,...

  • Page 22: 8. Speed

    22 8. Speed regulation 8.3 speed regulation for 2.0 kw motor (high speed) % r.P.M. -1 2 50 3 100 4 200 5 350 10 700 15 1000 20 1400 25 1700 30 2100 35 2500 40 2900 45 3200 50 3600 55 4050 60 4500 65 4800 70 5200 75 5600 80 6050 85 6500 90 6900 95 7200 100 7500

  • Page 23: Feed Motion X,y and Z-Axis

    23 9. Feed motion x,y and z-axis the traverse and longitudinal motion of the cross support (x,y-axis) is accomplished by turning the handwheels (parts-no. 4 and 12). Both slides can be blocked by means of the clamping levers (parts-no. 21 and 3). The feed motion – drilling and milling depth (z-axis)...

  • Page 24: 10.

    24 10. Recommendations for application and operation we recommend the following: ƒ the drill should be inserted and clamped with the chuck key in such a way that the drill is positioned exactly between the three clamping jaws of the toothed ring chuck, the quick action chuck or the drawing-in attach...

  • Page 25: 10.

    25 10. Recommendations for application and operation 10.1 swivelling of the milling head in order to produce bore holes and chamfering at an angle which diverges from the normal vertical position of the milling head, the milling head can be swivelled up to 90° either to the right or to the left. If ...

  • Page 26: 10.

    26 10. Recommendations for application and operation 10.2 drill stroke – depth stop it is also possible to set the feed motion of the milling spindle to a specified measure. Therefore, the desired depth can be adjusted by means of the operating lever (part no. 27,28,29) (depth can be read from the s...

  • Page 27: 11. Coolant

    27 11. Coolant unit the coolant unit consists of: 1. Tray with lubrication coolant sump which collects the lubrication coolant mixture fort he feed pump. Content: coolant unit 13 litres safety machine cabin 42 litres 2. Feed pump with the following electrical data: ƒ nominal voltage 230 v ƒ frequenc...

  • Page 28: 12.

    28 12. Declaration of noise levels in accordance with din en 24871 (german industrial standard) noise levels while running idle acoustic capacity level 78 db (a) sound pressure level on operator’s ear 62 db (a) the stated values reflect emission levels and not necessarily working levels. Although th...

  • Page 29: 13.

    29 13. Drawing and list of parts 13.1 electronics – protective cover for milling machines with 1.4 kw motor f1200 – f1210 - f1410 lf part-no. Pieces order-no. Designation 1 1 11200401 cap 2 1 11800005 circuit board 3 1 11200403 cover 4 4 11700001 countersunk screw 5 4 11700002 hexagon nut 5.1 4 1170...

  • Page 30: 13.

    30 13. Drawing and list of parts 13.2 electronics – protective cover for cnc milling machines with 1.4 kw motor cc-f1200 – cc-f1210 – cc-f1410 lf part-no. Pieces order-no. Designation 1 1 11200401 cap 2 1 11800005 circuit board 3 1 112004031 cover 4 4 11700001 countersunk screw 5 4 11700002 hexagon ...

  • Page 31: 13.

    31 13. Drawing and list of parts 13.3 protective cover for all milling machines f1200 - f1200 high speed - cc-f1200 - cc-f1200 high speed f1210 - f1210 high speed - cc-f1210 - cc-f1210 high speed f1410 lf - f1410 lf high speed - cc-f1410 lf - cc-f1410 lf high speed part-no. Pieces order-no. Designat...

  • Page 32: 13.

    32 13. Drawing and list of parts 13.4 milling head for milling machines with 1.4 kw motor f1200 – f1210 - f1410 lf – cc-f1200 – cc-f1210 - cc-f1410 lf.

  • Page 33: 13.

    33 13. Drawing and list of parts 13.4 milling head for milling machines with 1.4 kw motor f1200 – f1210 - f1410 lf – cc-f1200 – cc-f1210 - cc-f1410 lf part-no. Pieces order-no. Designation 1 1 11200101 housing 2 1 11200102 plastic ring 3 2 11810001 ball bearing 4 1 11700005 circlip 5 1 11820001 driv...

  • Page 34: 13.

    34 13. Drawing and list of parts 13.5 milling head for milling machines high speed with 2.0 kw motor f1200 high speed – f1210 high speed - f1410 lf high speed.

  • Page 35: 13.

    35 13. Drawing and list of parts 13.5 milling head for milling machines high speed with 2.0 kw motor f1200 high speed – f1210 high speed - f1410 lf high speed part-no. Pieces order-no. Designation 1 1 11202101 housing 2 1 11200102 plastic ring 3 1 11700116 hexagon socket screw 4 1 11700005 circlip 5...

  • Page 36: 13.

    36 13. Drawing and list of parts 13.6 milling head for cnc milling machines high speed with 2.0 kw motor cc-f1200 high speed – cc-f1210 high speed - cc-f1410 lf high speed.

  • Page 37: 13.

    37 13. Drawing and list of parts 13.6 milling head for cnc milling machines high speed with 2.0 kw motor cc-f1200 high speed – cc-f1210 high speed - cc-f1410 lf high speed part-no. Pieces order-no. Designation 1 1 11202101 housing 2 1 11200102 plastic ring 3 1 11700116 hexagon socket screw 4 1 11700...

  • Page 38: 13.

    38 13. Drawing and list of parts 13.7 z-column with vertical slide for milling machines with trapezoid thread spindle f1200 – f1200 high speed – f1210 – f1210 high speed.

  • Page 39: 13.

    39 13. Drawing and list of parts 13.7 z-column with vertical slide for milling machines with trapezoid thread spindle f1200 – f1200 high speed – f1210 – f1210 high speed part-no. Pieces order-no. Designation 1 1 11200301 column 2 1 11200302 adjusting strip 3 1 11200303 vertical slide 4 1 11700017 in...

  • Page 40: 13.

    40 13. Drawing and list of parts 13.8 z-column with vertical slide for milling machines with ball screw f1200 – f1200 high speed – f1210 – f1210 high speed.

  • Page 41: 13.

    41 13. Drawing and list of parts 13.8 z-column with vertical slide for milling machines with ball screw f1200 – f1200 high speed – f1210 – f1210 high speed part-no. Pieces order-no. Designation 1 1 11200301 column 2 1 11200302 adjusting strip 3 1 11200303 vertical slide 4 1 11700017 index bolt 5 1 1...

  • Page 42: 13.

    42 13. Drawing and list of parts 13.9 z-column with vertical slide for cnc milling machines trapezoid thread spindle cc-f1200 – cc-f1200 high speed – cc-f1210 – cc-f1210 high speed.

  • Page 43: 13.

    43 13. Drawing and list of parts 13.9 z-column with vertical slide for cnc milling machines trapezoid thread spindle cc-f1200 – cc-f1200 high speed – cc-f1210 – cc-f1210 high speed part-no. Pieces order-no. Designation 1 1 11200301 column 2 1 11200302 adjusting strip 3 1 11200303 vertical slide 4 1 ...

  • Page 44: 13.

    44 13. Drawing and list of parts 13.10 z-column with vertical slide for cnc milling machines with ball screw cc-f1200 – cc-f1200 high speed – cc-f1210 – cc-f1210 high speed.

  • Page 45: 13.

    45 13. Drawing and list of parts 13.10 z-column with vertical slide for cnc milling machines with ball screw cc-f1200 – cc-f1200 high speed – cc-f1210 – cc-f1210 high speed part-no. Pieces order-no. Designation 1 1 11200301 column 2 1 11200302 adjusting strip 3 1 11200303 vertical slide 4 1 11700017...

  • Page 46: 13.

    46 13. Drawing and list of parts 13.11 z-column with vertical slide for milling machines with automatic feed f1200 – f1200 high speed – f1210 – f1210 high speed.

  • Page 47: 13.

    47 13. Drawing and list of parts 13.11 z-column with vertical slide for milling machines with automatic feed f1200 – f1200 high speed – f1210 – f1210 high speed part-no. Pieces order-no. Designation 1 1 11200301 column 2 1 11200302 adjusting strip 3 1 11200303 vertical slide 4 1 11700017 index bolt ...

  • Page 48: 13.

    48 13. Drawing and list of parts 13.12 z-column for milling machines with linear guides with trapezoid thread spindle f1410 lf.

  • Page 49: 13.

    49 13. Drawing and list of parts 13.12 z-column for milling machines with linear guides with trapezoid thread spindle f1410 lf part-no. Pieces order-no. Designation 1 1 16400301 z-column 2 1 16400203 base plate 3 1 11200320 cover plate 4 4 11700033 screw 5 4 11700034 spring lock washer 6 2 11700035 ...

  • Page 50: 13.

    50 13. Drawing and list of parts 13.13 vertical slide for milling machines with linear guides with trapezoid thread spindle f1410 lf.

  • Page 51: 13.

    51 13. Drawing and list of parts 13.13 vertical slide for milling machines with linear guides with trapezoid thread spindle f1410 lf part-no. Pieces order-no. Designation 1 1 11860003 concertina cover z-axis, top 2 1 16400302 jam 4 1 11860003 concertina cover z-axis, bottom 5 1 16400303 vertical sli...

  • Page 52: 13.

    52 13. Drawing and list of parts 13.14 z-column for milling machines with linear guides with ball screw f1410 lf.

  • Page 53: 13.

    53 13. Drawing and list of parts 13.14 z-column for milling machines with linear guides with ball screw f1410 lf part-no. Pieces order-no. Designation 1 1 16400301 z column 2 1 16400203 base plate 3 1 16400347 protective cover z-axis 4 4 11700033 screw 5 4 11700034 spring lock washer 6 2 11700035 he...

  • Page 54: 13.

    54 13. Drawing and list of parts 13.15 vertical slide for milling machines with linear guides with ball screw f1410 lf.

  • Page 55: 13.

    55 13. Drawing and list of parts 13.15 vertical slide for milling machines with linear guides with ball screw f1410 lf part-no. Pieces order-no. Designation 1 1 11860003 concertina cover z-axis, top 2 1 11860003 concertina cover z-axis,base 3 1 16400302 jam 3.1 1 16400319 clamping plate 3.2 1 118400...

  • Page 56: 13.

    56 13. Drawing and list of parts 13.16 z-column for cnc milling machines with linear guides with ball screw cc-f1410 lf.

  • Page 57: 13.

    57 13. Drawing and list of parts 13.16 z-column for cnc milling machines mit linear guides with ball screw cc-f1410 lf part-no. Pieces order-no. Designation 1 1 16400301 z-column 2 1 16400203 base plate 3 1 16400347 protective cover z-axis 4 4 11700033 screw 5 4 11700034 spring lock washer 6 2 11700...

  • Page 58: 13.

    58 13. Drawing and list of parts 13.17 vertical slide for cnc milling machines with linear guides with ball screw cc-f1410 lf.

  • Page 59: 13.

    59 13. Drawing and list of parts 13.17 vertical slide for cnc milling machines with linear guides with ball screw cc-f1410 lf part-no. Pieces order-no. Designation 1 1 11860003 concertina cover z-axis, top 3 2 16400227 switch cam 3.1 2 11700112 hexagon cylinder screw 4 1 11860003 concertina cover z-...

  • Page 60: 13.

    60 13. Drawing and list of parts 13.18 z-spindle complete for milling machines f1200 – f1200 high speed – f1210 – f1210 high speed – f1410 lf – f1410 lf high speed part-no. Pieces order-no. Designation 1 1 11200327 spindle for milling machines with trapezoid thread spindle 1 11245327 spindle with sp...

  • Page 61: 13.

    61 13. Drawing and list of parts 13.19 lateral drive for z-spindle complete for milling machines f1200 – f1200 high speed – cc-f1200 – cc-f1200 high speed f1210 – f1210 high speed – cc-f1210 – cc-f1210 high speed f1410 lf – f1410 lf high speed – cc-f1410 lf - cc-f1410 lf high speed part-no. Pieces o...

  • Page 62: 13.

    62 13. Drawing and list of parts 13.20 z-spindle with cnc drive complete for milling machines cc-f1200 – cc-f1200 high speed – cc-f1210 – cc-f1210 high speed cc-f1410 lf – cc-f1410 lf high speed.

  • Page 63: 13.

    63 13. Drawing and list of parts 13.20 z-spindle with cnc drive complete for milling machines cc-f1200 – cc-f1200 high speed – cc-f1210 – cc-f1210 high speed cc-f1410 lf – cc-f1410 lf high speed part-no. Pieces order-no. Designation 1 1 11200327 spindle for milling machines with trapezoid thread spi...

  • Page 64: 13.

    64 13. Drawing and list of parts 13.21 lateral drive for z-spindle with automatic feed complete for milling machines f1200 – f1200 high speed – f1210 – f1210 high speed – f1410 lf – f1410 lf high speed.

  • Page 65: 13.

    65 13. Drawing and list of parts 13.21 lateral drive for z-spindle with automatic feed complete for milling machines f1200 – f1200 high speed – f1210 – f1210 high speed – f1410 lf – f1410 lf high speed part-no. Pieces order-no. Designation 1 1 112003187 scale ring (40 graduation marks) for milling m...

  • Page 66: 13.

    66 13. Drawing and list of parts 13.22 cross support for milling machines with trapezoid thread spindle f1200 – f1200 high speed – f1210 – f1210 high speed.

  • Page 67: 13.

    67 13. Drawing and list of parts 13.22 cross support for milling machines with trapezoid thread spindle f1200 – f1200 high speed – f1210 – f1210 high speed part-no. Piece s order-no. Designation 1 1 11200201 top slide f1200 – f1200 high speed 1 1 11400201 top slide f1210 – f1210 high speed 2 1 11200...

  • Page 68: 13.

    68 13. Drawing and list of parts 13.23 cross support for milling machines with ball screw f1200 – f1200 high speed – f1210 – f1210 high speed.

  • Page 69: 13.

    69 13. Drawing and list of parts 13.23 cross support for milling machines with ball screw f1200 – f1200 high speed – f1210 – f1210 high speed part-no. Piece s order-no. Designation 1 1 11200201 top slide f1200 – f1200 high speed 1 1 11400201 top slide f1210 – f1210 high speed 2 1 11245202 cross slid...

  • Page 70: 13.

    70 13. Drawing and list of parts 13.24 cross support for cnc milling machines with trapezoid thread spindle cc-f1200 – cc-f1200 high speed – cc-f1210 – cc-f1210 high speed.

  • Page 71: 13.

    71 13. Drawing and list of parts 13.24 cross support for cnc milling machines with trapezoid thread spindle cc-f1200 – cc-f1200 high speed – cc-f1210 – cc-f1210 high speed part-no. Piece s order-no. Designation 1 1 11200201 top slide f1200 – f1200 high speed 1 1 11400201 top slide f1210 – f1210 high...

  • Page 72: 13.

    72 13. Drawing and list of parts 13.25 top slide for milling machines with linear guides f1410 lf part-no. Pieces order-no. Designation 1 1 16400201 top slide 2 2 11810028 guide rail 700 mm 3 26 11700031 cylinder screw 4 1 16400212 spindle extension x-axis 5 2 11700046 cylinder screw 6 1 16410210 co...

  • Page 73: 13.

    73 13. Drawing and list of parts 13.26 cross slide for milling machines with linear guides and trapezoid thread spindle f1410 lf part-no. Pieces order-no. Designation 1 1 11860004 concertina cover, rear 2 1 11860004 concertina cover, front 3 1 11810029 jam complete 5 1 16400202 cross slide 6 8 11810...

  • Page 74: 13.

    74 13. Drawing and list of parts 13.27 cross slide for milling machines with linear guides and ball screw f1410 lf part-no. Pieces order-no. Designation 1 1 11860004 concertina cover, rear 2 1 11860004 concertina cover, front 3 1 11810029 jam complete 5 1 16400202 cross slide 6 8 11810026 guide carr...

  • Page 75: 13.

    75 13. Drawing and list of parts 13.28 top slide for cnc milling machines with linear guides cc-f1410 lf part-no. Pieces order-no. Designation 1 1 16400201 top slide 2 2 11810028 guide rails 700 mm 3 26 11700031 hexagon cylinder screw 4 1 16400212 spindle bearing extension 5 2 11700046 hexagon cylin...

  • Page 76: 13.

    76 13. Drawing and list of parts 13.29 cross slide for cnc milling machines with linear guides cc-f1410 lf part-no. Pieces order-no. Designation 1 1 11860004 concertina cover 2 1 11860004 concertina cover 3 4 16400227 switch cams 4 1 16400202 cross slide 5 8 11810026 guide carriage 6 32 11700031 cyl...

  • Page 77: 13.

    77 13. Drawing and list of parts 13.30 x-spindle for milling machines f1200 – f1200 high speed – f1210 – f1210 high speed – f1410 lf – f1410 lf high speed part-no. Pieces order-no. Designation 1 1 112002103 spindle bearing 2 2 11810007 ball bearing 3 1 112002105 adjusting ring 4 1 11850002 spring 5 ...

  • Page 78: 13.

    78 13. Drawing and list of parts 13.31 y-spindle for milling machines f1200 – f1200 high speed – f1210 – f1210 high speed – f1410 lf – f1410 lf high speed.

  • Page 79: 13.

    79 13. Drawing and list of parts 13.31 y-spindle for milling machines f1200 – f1200 high speed – f1210 – f1210 high speed – f1410 lf – f1410 lf high speed part-no. Pieces order-no. Designation 1 1 112002103 spindle bearing 2 2 11810007 ball bearing 3 1 112002105 adjusting ring 4 1 11850002 spring 5 ...

  • Page 80: 13.

    80 13. Drawing and list of parts 13.32 x-spindle for cnc milling machines cc-f1200 – cc-f1200 high speed cc-f1210 – cc-f1210 high speed cc-f1410 lf – cc-f1410 lf high speed.

  • Page 81: 13.

    81 13. Drawing and list of parts 13.32 x-spindle for cnc milling machines cc-f1200 – cc-f1200 high speed cc-f1210 – cc-f1210 high speed cc-f1410 lf – cc-f1410 lf high speed part-no. Pieces order-no. Designation 1 1 112002103 spindle bearing 2 2 11810007 ball bearing 4 1 11850002 spring 5 1 11810004 ...

  • Page 82: 13.

    82 13. Drawing and list of parts 13.33 y-spindle for cnc milling machines cc-f1200 – cc-f1200 high speed cc-f1210 – cc-f1210 high speed cc-f1410 lf – cc-f1410 lf high speed.

  • Page 83: 13.

    83 13. Drawing and list of parts 13.33 y-spindle for cnc milling machines cc-f1200 – cc-f1200 high speed cc-f1210 – cc-f1210 high speed cc-f1410 lf – cc-f1410 lf high speed part-no. Pieces order-no. Designation 1 1 112002103 spindle bearing 2 2 11810007 ball bearing 4 1 11850002 spring 5 1 11810004 ...

  • Page 84: 13.

    84 13. Drawing and list of parts 13.34 x-spindle for automatic feed for milling machines f1200 – f1200 high speed – f1210 – f1210 high speed– f1410 lf – f1410 lf high speed.

  • Page 85: 13.

    85 13. Drawing and list of parts 13.34 x-spindle for automatic feed for milling machines f1200 – f1200 high speed – f1210 – f1210 high speed– f1410 lf – f1410 lf high speed part-no. Pieces order-no. Designation 1 1 112002103 spindle bearing 2 2 11810007 ball bearing 4 1 11850002 spring 5 1 11810004 ...

  • Page 86: 13.

    86 13. Drawing and list of parts 13.35 y-spindle for automatic feed for milling machines f1200 – f1200 high speed – f1210 – f1210 high speed– f1410 lf – f1410 lf high speed.

  • Page 87: 13.

    87 13. Drawing and list of parts 13.35 y-spindle for automatic feed for milling machines f1200 – f1200 high speed – f1210 – f1210 high speed– f1410 lf – f1410 lf high speed part-no. Pieces order-no. Designation 1 1 112002103 spindle bearing 2 2 11810007 ball bearing 4 1 11850002 spring 5 1 11810004 ...

  • Page 88: 13.

    88 13. Drawing and list of parts 13.36 control console nccad with 1.4 kw motor.

  • Page 89: 13.

    89 13. Drawing and list of parts 13.36 control console nccad with 1.4 kw motor part-no. Pieces order-no. Designation 1 1 control package nccad basic 1 control package nccad professional 2 1 11800008 emergency off switch 3 1 11800004 potentiometer 4 1 11800001 on/off switch 5 1 11800021 toggle switch...

  • Page 90: 13.

    90 13. Drawing and list of parts 13.37 control console nccad with 2.0 kw motor.

  • Page 91: 13.

    91 13. Drawing and list of parts 13.37 control console nccad with 2.0 kw motor part-no. Pieces order-no. Designation 1 1 11800031 control package milling basic 1 11800032 control package milling professional 2 1 11800008 emergency off switch 3 1 11800026 potentiometer 5 1 11800021 toggle switch 6 2 ...

  • Page 92: 13.

    92 13. Drawing and list of parts 13.38 support arm for control console part-no. Pieces order-no. Designation 1 1 16400501 arm support 2 1 16400502 arm support 3 4 16400503 spacer 4 2 11840004 clamping lever 5 1 16400500 console arm 6 2 16400504 ring stop 7 4 11700079 threaded pin.

  • Page 93: 14. Circuit

    93 14. Circuit diagram 14.1 motor 1.4 kw this document shows all units of the electrical equipment including the mains connection 1.1 emergency off switch control electronics danger potentiometer 1 3 2 4 5 date mains plug l n 1 1 2 2 motor 2.2/2.1 3.2/3.1 12(k) a2 11 22(i) 21 main switch.

  • Page 94: 14. Circuit

    94 14. Circuit diagram 14.2 high speed motor 2.0 kw this document shows all units of the electrical equipment including the mains connection.

  • Page 95: 14. Circuit

    95 14. Circuit diagram 14.3 nccad with 1.4 kw motor this document shows all units of the electrical equipment including the mains connection.

  • Page 96: 14. Circuit

    96 14. Circuit diagram 14.4 nccad with 2.0 kw motor this document shows all units of the electrical equipment including the mains connection.

  • Page 97: 14. Circuit

    97 14. Circuit diagram 14.5 stepper motor basic version this document shows all units of the electrical equipment including the mains connection.

  • Page 98: 14. Circuit

    98 14. Circuit diagram 14.6 stepper motor professional version this document shows all units of the electrical e including the mains connection.