Summary of TC 4.5
Page 1
Part number: 20-man-01 revision no: 3 tube cut off saw model tc 4.5 20-000-01 tube & pipe cut-off machines mod. Tc 4.5 ser.No. E.H. Wachs companies 100 shepard st. Wheeling il. 60090 patent pending revised jun 98 i.
Page 2
Table of contents section i. Standard equipment ......................................................................................... 1 section ii. Safety safety instructions ...................................................................................... ... .. 2 section iii. Ce declarati...
Page 3: Tube Cut Off Saw Tc 4.5
Tube cut off saw tc 4.5 1 • tc 4.5 machine with table clamps • operating hand tools • operating manual • storage case section i tc 4.5 standard equipment.
Page 4: Tube Cut Off Saw Tc 4.5
Tube cut off saw tc 4.5 2 1. Read the operating manual!! Reading the setup and operating instructions prior to beginning the setup procedures can save valuable time and help prevent injury to operators or damage to machines. 2. Inspect machine & accessories! Prior to machine setup physically inspect...
Page 5
1. Die betriebsanleitung lesen! Bedienungsmänner können wertvolle zeit einsparen und verletzungen und beschädigungen der maschine vermeiden, wenn sie die aufbau- und betriebsanleitungen vor dem aufbau durchlesen. 2. Maschine und zusatzgerÄte ÜberprÜfen! Vor dem aufbau der maschine sollte diese und d...
Page 6
Eh wachs har sedan 1883 etablerat ett gott anseende när det gäller kvalitet och kundtillfredsställelse. Wachs känner sig därför förpliktigat att göra sitt yttersta för att garantera säkrast möjliga användning av wachs-utrustning. Vi har ställt samman en lista av säkerhetsanvisningar som ett led i vå...
Page 7
1. LÆs brugsanvisningen!! Hvis man læser anvisningerne i klargøring og drift, inden man begynder at gøre maskinen klar, kan man spare tid og forhindre person- og maskinskade. 2. InspicÉr maskine og udstyr! Inden maskinen gøres klar, skal man inspicere maskinen og udstyret. Se efter slidte fittings, ...
Page 8: Tube Cut Off Saw Tc 4.5
Tube cut off saw tc 4.5 6 name and address of manufacturer (if different) distributed in the ec by: business address: we declare that the machine described below conforms with the ehsr of the machinery directive 89/ 392/eec and amendments 91/368/eec, 93/44/eec and 93/68/eec machine title model numbe...
Page 9: Tube Cut Off Saw Tc 4.5
Tube cut off saw tc 4.5 7 machine model tc 4.5 maximum sound level (decibels) 96db average sound level (decibels) 90db machining capacity: 1/2" (12.5 mm) through 4 1/2" (114 mm) o.D. Machining function: square, burr-free saw cutting machining materials: stainless steel & high alloy wall thickness: ....
Page 10: Tube Cut Off Saw Tc 4.5
Tube cut off saw tc 4.5 8 a. Mounting machine to table 1. Tc 4.5 has mounting clamps installed. Place saw on edge of table and secure 2 ½ -13 hhcs with 3/4” wrench. 2. For permanent installation, remove mounting clamps by loos- ening the 2 ½-13 hhcs with 3/4” wrench. Fasten frame to table using 1/2”...
Page 11: Tube Cut Off Saw Tc 4.5
Tube cut off saw tc 4.5 9 e. Machining instructions 1. Set speed control on back of motor, see chart on page 11. 2. Squeeze trigger on motor and lock trigger on. (figure 7) 3. Use motor handle to rotate cutter gear box clock- wise (figure 8). 4. Rotate cutter gear box clockwise 360°. 5. After comple...
Page 12: Tube Cut Off Saw Tc 4.5
Tube cut off saw tc 4.5 1 0 1. The tc 4.5 has been designed to minimize maintenance. Clean and inspect moving parts regularly for wear. Check power cord peri- odically for damage or wear. Replace if cracked or damaged. 2. Replace blades at first sign of wear. 3. To use indicator, mark workpiece with...
Page 13: Tube Cut Off Saw Tc 4.5
Tube cut off saw tc 4.5 1 1 cutter blade selection information: section vii tc 4.5 operational charts & graphs wall thickness cutter # up to .035” 30-600-01 .035” to .080” 30-600-02 .080” to .120” 30-600-03 description wall thickness motor speed speed dial all stainless steel 300 series .030” to .08...
Page 14: Tube Cut Off Saw Tc 4.5
Tube cut off saw tc 4.5 1 2 motor will not run .......................... Power unit not connected ............................. Check power cord & connection motor runs slowly .......................... Improper speed or gear box setting ............. Refer to speed control & gear box info. Difficu...
Page 15: Tube Cut Off Saw Tc 4.5
Tube cut off saw tc 4.5 1 3 parts lists & exploded view drawings section ix.
Page 16: Tube Cut Off Saw Tc 4.5
Tube cut off saw tc 4.5 14 34 19-015-00 1 bearing, drawn cup needle 35 20-034-00 1 bearing, thrust 36 20-035-00 1 bearing 37 20-036-00 1 bearing 38 19-025-00 1 seal, .750 x 1.25 39 20-037-01 1 seal, 1.000 x 1.379 40 20-038-00 1 seal, 1.15 x 1.69 41 20-039-00 1 spring, compresion 42 19-062-00 2 nut, ...
Page 17
23.
Page 18: Tube Cut Off Saw Tc 4.5
Tube cut off saw tc 4.5 16 to place an order or to get more detailed information on any e.H. Wachs products, call us at: 1-800-323-8185. Ordering replacement parts please use parts list provided in manual. Have part description and part number of required replacement part or parts to help expedite o...